Toyota Tundra (2015 year). Manual — part 823
PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002HBW00KX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE PROPELLER SHAFT HEAT INSULATOR
(a) Remove the 2 bolts and heat insulator from the heat insulator
bracket.
2. REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
(a) Remove the 2 bolts and heat insulator bracket from the crossmember.
3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(a) for Front Differential Side:
(1) Place matchmarks on the differential and propeller shaft flange.
Text in Illustration
*a
for Front Differential Side
*b
Matchmark
(2) Remove the 4 nuts, 4 washers and disconnect the propeller shaft from the differential.
NOTICE:
(b) for Transfer Side:
(1) Place matchmarks on the transfer and propeller shaft
flanges.
Text in Illustration
*a
for Transfer Side
*b
Matchmark
(2) Remove the 4 nuts and 4 washers.
(c) Remove the propeller shaft from the transfer flange.
PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002HBX00KX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: DISASSEMBLY; 2015 MY Tundra [08/2014 -
]
DISASSEMBLY
1. REMOVE FRONT PROPELLER SHAFT JOINT SPIDER BEARING SNAP RING
(a) Place matchmarks on the flange yoke.
Text in Illustration
*a
Matchmark
(b) Using a brass bar and hammer, slightly tap in the spider bearing
outer races.
(c) Using needle-nose pliers, remove the 4 snap rings from the grooves.
2. REMOVE SPIDER BEARING
(a) Using SST, push out the bearing from the flange yoke.
SST: 09332-25010
HINT:
Before installing SST, sufficiently raise the part labeled A. If part A is too low, SST may be difficult to
install.
PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: D...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст