Toyota Tundra (2015 year). Manual — part 2841
(c) Turn the ignition switch to ON.
(d) Read and record any DTCs from the tire pressure warning light on the combination meter. Refer to the
If the tire pressure warning light does not output any DTCs or the normal system code, inspect the tire
pressure warning light circuit or TC and CG terminal circuit.
TROUBLE AREA
SEE PAGE
Tire pressure warning light circuit
TC and CG terminal circuit
If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is output first.
(e) Refer to the Diagnostic Trouble Code Chart
for DTC information.
(f) After completing the check, turn the ignition switch off and remove SST from the DLC3.
SST: 09843-18040
3. CLEAR DTC
HINT:
After repairing the malfunctions, clear the DTCs.
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON and the Techstream on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.
(e) Clear the DTCs following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: DTC ...
Last Modified: 9-16-2014
6.6 U
Doc ID: RM000000XMY0B6X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: DATA LIST / ACTIVE TEST; 2015 MY Tundra
[08/2014 - ]
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely
on these reference values when deciding whether a part is faulty or not.
(a) Turn the ignition switch OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON and the Techstream on.
(d) Enter the following menu items: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
Tire Pressure Monitor
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL
CONDITION
DIAGNOSTIC NOTE
Mode Status
Tire pressure warning system
mode/Normal or Test
Normal: Normal
mode
Test: Test mode
-
Main Tire
4 or 5
4 should be
displayed
-
Vehicle Speed
Vehicle speed reading/
min.: 0 km/h (0 mph),
max.: 255 km/h (158 mph)
Actual vehicle speed
Speed indicated on the combination
meter
Registered ID1
Code
Registered ID1 code/
min.: 0
max.: FFFFFFFF*1
The transmitter ID
registered in the
transmitter ID1 is
displayed
-
Registered ID2
Code
Registered ID2 code/
min.: 0
max.: FFFFFFFF*1
The transmitter ID
registered in the
transmitter ID2 is
displayed
-
Registered ID3
Code
Registered ID3 code/
min.: 0
max.: FFFFFFFF*1
The transmitter ID
registered in the
transmitter ID3 is
-
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: DATA ...
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL
CONDITION
DIAGNOSTIC NOTE
displayed
Registered ID4
Code
Registered ID4 code/
min.: 0
max.: FFFFFFFF*1
The transmitter ID
registered in the
transmitter ID4 is
displayed
-
ID Transmission
Status
Transmitter ID transmission
status /
Finish or Now
Finish or Now
-
Initialization
Switch
Tire pressure warning reset
switch/
ON or OFF
ON: Switch is
pressed and held
OFF: Switch is not
pressed
-
Initialization SW
Info
Tire pressure warning reset
switch setting information/
WITH or WITHOUT
WITH or WITHOUT
-
ID 1 Tire
Inflation
Pressure
ID1 tire inflation pressure /
min.: Absolute pressure /
100.00 kPa (1 kgf/cm
2
, 14
psi), Relative pressure / 0 kPa
(0 kgf/cm
2
, 0 psi)
max.: Absolute pressure /
449.35 kPa (4.5 kgf/cm
2
, 63
psi), Relative pressure / 349.35
kPa (3.6 kgf/cm
2
, 51 psi)
Actual tire inflation
pressure
If 100 kPa (1 kgf/cm
2
, 14 psi) for
the absolute pressure or 0 kPa (0
kgf/cm
2
, 0 psi) is displayed for the
relative pressure, the data has not
been received.*2
ID 2 Tire
Inflation
Pressure
ID2 tire inflation pressure /
min.: Absolute pressure /
100.00 kPa (1 kgf/cm
2
, 14
psi), Relative pressure / 0 kPa
(0 kgf/cm
2
, 0 psi)
max.: Absolute pressure /
449.35 kPa (4.5 kgf/cm
2
, 63
psi), Relative pressure / 349.35
kPa (3.6 kgf/cm
2
, 51 psi)
Actual tire inflation
pressure
If 100 kPa (1 kgf/cm
2
, 14 psi) for
the absolute pressure or 0 kPa (0
kgf/cm
2
, 0 psi) is displayed for the
relative pressure, the data has not
been received.*2
ID 3 Tire
Inflation
Pressure
ID3 tire inflation pressure /
min.: Absolute pressure /
100.00 kPa (1 kgf/cm
2
, 14
psi), Relative pressure / 0 kPa
(0 kgf/cm
2
, 0 psi)
max.: Absolute pressure /
449.35 kPa (4.5 kgf/cm
2
, 63
psi), Relative pressure / 349.35
kPa (3.6 kgf/cm
2
, 51 psi)
Actual tire inflation
pressure
If 100 kPa (1 kgf/cm
2
, 14 psi) for
the absolute pressure or 0 kPa (0
kgf/cm
2
, 0 psi) is displayed for the
relative pressure, the data has not
been received.*2
ID 4 Tire
Inflation
Pressure
ID4 tire inflation pressure /
min.: Absolute pressure /
100.00 kPa (1 kgf/cm
2
, 14
Actual tire inflation
pressure
If 100 kPa (1 kgf/cm
2
, 14 psi) for
the absolute pressure or 0 kPa (0
kgf/cm
2
, 0 psi) is displayed for the
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: DATA ...
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL
CONDITION
DIAGNOSTIC NOTE
psi), Relative pressure / 0 kPa
(0 kgf/cm
2
, 0 psi)
max.: Absolute pressure /
449.35 kPa (4.5 kgf/cm
2
, 63
psi), Relative pressure / 349.35
kPa (3.6 kgf/cm
2
, 51 psi)
relative pressure, the data has not
been received.*2
ID 5 Tire
Inflation
Pressure
-
-
-
ID 1
Temperature in
Tire
ID1 temperature in tire/
min.: -50°C (-58°F),
max.: 205°C (401°F)
Actual tire
temperature
If -50°C (-58°F) is displayed, the
data has not been received.
ID 2
Temperature in
Tire
ID2 temperature in tire/
min.: -50°C (-58°F),
max.: 205°C (401°F)
Actual tire
temperature
If -50°C (-58°F) is displayed, the
data has not been received.
ID 3
Temperature in
Tire
ID3 temperature in tire/
min.: -50°C (-58°F),
max.: 205°C (401°F)
Actual tire
temperature
If -50°C (-58°F) is displayed, the
data has not been received.
ID 4
Temperature in
Tire
ID4 temperature in tire/
min.: -50°C (-58°F),
max.: 205°C (401°F)
Actual tire
temperature
If -50°C (-58°F) is displayed, the
data has not been received.
ID 5
Temperature in
Tire
-
-
-
ID 1 Battery
Voltage
ID1 battery voltage/
OVER or LESS
OVER
-
ID 2 Battery
Voltage
ID2 battery voltage/
OVER or LESS
OVER
-
ID 3 Battery
Voltage
ID3 battery voltage/
OVER or LESS
OVER
-
ID 4 Battery
Voltage
ID4 battery voltage/
OVER or LESS
OVER
-
ID 5 Battery
Voltage
-
-
-
ID 1 Initial
Threshold of
Low-pressure
min.: 100.00 kPa (1 kgf/cm
2
,
14 psi)
max.: 449.35 kPa (4.5 kgf/cm
2
, 63 psi)
Tire pressure after
initialization
-
ID 2 Initial
Threshold of
Low-pressure
min.: 100.00 kPa (1 kgf/cm
2
,
Tire pressure after
initialization
-
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: DATA ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст