Toyota Tundra (2015 year). Manual — part 376
71. REMOVE NO. 1 BRAKE DISC SET
(a) Remove the flange, 4 discs and 4 plates from the case.
72. INSPECT NO. 1 BRAKE DISC
73. REMOVE NO. 1 BRAKE PISTON RETURN SPRING SNAP
RING
(a) Using a screwdriver, remove the No. 1 brake piston return
spring snap ring from the case.
74. REMOVE NO. 1 BRAKE PISTON RETURN SPRING
SUB-ASSEMBLY
(a) Remove the brake piston return spring and No. 1 brake piston
with No. 1 brake cylinder from the case.
75. INSPECT BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
76. REMOVE NO. 1 BRAKE PISTON
(a) Hold the No. 1 brake cylinder and apply compressed air (392
kPa (4.0 kgf/cm 2 , 57 psi)) to the No. 1 brake cylinder to
remove the No. 1 brake piston.
HINT:
If the piston does not pop out with compressed air, lift the piston
out with needle-nose pliers.
(b) Remove the 2 O-rings from the No. 1 brake piston.
77. REMOVE NO. 2 BRAKE DISC SET
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Using a screwdriver, remove the snap ring from the case.
(b) Remove the flange, 4 discs, 4 plates and brake piston return
spring from the case.
78. INSPECT NO. 2 BRAKE DISC
79. INSPECT NO. 2 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
80. REMOVE NO. 2 BRAKE PISTON
(a) Hold the No. 2 brake piston and apply compressed air (392 kPa,
4.0 kgf/cm 2 , 57 psi) to the transmission case to remove the
No. 2 brake piston and No. 2 brake cylinder.
HINT:
If the piston does not pop out with compressed air, lift the piston
out with needle-nose pliers.
(b) Remove the 2 O-rings from the No. 2 brake piston.
81. REMOVE CENTER PLANETARY GEAR ASSEMBLY
(a) Remove the thrust bearing race, center planetary gear and
planetary sun gear from the case.
82. INSPECT CENTER PLANETARY GEAR ASSEMBLY
83. REMOVE INTERMEDIATE SHAFT
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Using a screwdriver, remove the snap ring from the case.
(b) Remove the intermediate shaft with No. 3 1-way clutch
assembly from the case.
84. INSPECT NO. 3 1-WAY CLUTCH ASSEMBLY
85. REMOVE NO. 3 1-WAY CLUTCH ASSEMBLY
(a) Remove the No. 3 1-way clutch assembly and 1-way clutch inner
race from the intermediate shaft.
86. REMOVE REAR PLANETARY RING GEAR FLANGE SUB-ASSEMBLY
(a) Remove the planetary ring gear flange together with the rear planetary ring gear, thrust bearing race,
thrust needle roller bearing and thrust bearing race from the intermediate shaft.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Using a screwdriver, remove the snap ring.
(c) Remove the rear planetary ring gear flange from the rear planetary ring gear.
87. INSPECT REAR PLANETARY RING GEAR FLANGE SUB-ASSEMBLY
88. INSPECT INTERMEDIATE SHAFT
89. REMOVE BRAKE PLATE STOPPER SPRING
90. REMOVE NO. 4 BRAKE DISC SET
(a) Remove the 2 flanges, 8 discs and 7 plates from the case.
91. INSPECT NO. 4 BRAKE DISC
92. REMOVE REAR PLANETARY GEAR ASSEMBLY
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст