Toyota Tundra (2015 year). Manual — part 2900
(a) Detach the clamp and disconnect the engine room wire.
(b) Remove the 3 nuts and front bumper arm LH.
8. REMOVE FRONT BUMPER ARM RH
HINT:
Use the same procedure described for the LH side.
9. REMOVE FRONT BUMPER REINFORCEMENT
(a) Remove the 6 nuts and front bumper reinforcement.
10. REMOVE FRONT BUMPER NO. 2 EXTENSION
SUB-ASSEMBLY LH
(a) Remove the 4 nuts and front bumper No. 2 extension
sub-assembly LH.
11. REMOVE FRONT BUMPER NO. 2 EXTENSION SUB-ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
12. REMOVE FRONT BUMPER SIDE SUPPORT LH
(a) Remove the screw.
(b) Using a screwdriver, turn the clip 90° and remove the clip.
(c) Detach the clip and remove the front bumper side support LH.
EXTERIOR: FRONT BUMPER: REMOVAL; 2015 MY Tundra [08/201...
13. REMOVE FRONT BUMPER SIDE SUPPORT RH
HINT:
Use the same procedure described for the LH side.
14. REMOVE FRONT BUMPER CENTER UPPER RETAINER
(a) Remove the 6 nuts and front bumper center upper retainer.
15. REMOVE FRONT BUMPER END RETAINER LH
(a) Remove the 3 nuts and front bumper end retainer LH.
16. REMOVE FRONT BUMPER END RETAINER RH
HINT:
Use the same procedure described for the LH side.
EXTERIOR: FRONT BUMPER: REMOVAL; 2015 MY Tundra [08/201...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002W4O009X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: EXTERIOR: FRONT BUMPER: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
2. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT:
Use the same procedure described for the LH side.
3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
5. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
(a) Remove the clip.
(b) Remove the 10 bolts and front bumper extension mounting bracket.
6. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
(a) Detach the 2 claws and remove the front bumper hole cover LH.
Text in Illustration
*A
for Steel Type Bumper
*B
for Resin Type Bumper
EXTERIOR: FRONT BUMPER: DISASSEMBLY; 2015 MY Tundra [0...
7. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
HINT:
Use the same procedure described for the LH side.
8. REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)
(a) for Steel Type Bumper:
(1) Detach the 2 claws and remove the front bumper hole cover
LH.
(b) for Resin Type Bumper:
(1) Remove the clip.
(2) Detach the 2 claws and remove the front bumper hole cover
LH.
9. REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)
HINT:
Use the same procedure described for the LH side.
10. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY
(a) Remove the 2 screws and front license plate bracket
sub-assembly.
11. REMOVE FRONT BUMPER EXTENSION LH
EXTERIOR: FRONT BUMPER: DISASSEMBLY; 2015 MY Tundra [0...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст