Toyota Tundra (2015 year). Manual — part 492
(a) Install the brake piston return spring.
(b) Install the 2 flanges, 4 discs, 3 plates.
Install in order:
F - D - P - D - P - D - P - D - F
HINT:
D = Disc
P = Plate
F = Flange
(c) Using SST and a press, compress the return spring and install
the snap ring.
SST: 09351-40010
09351-04010
09351-04030
09351-04040
09351-04050
17. INSTALL NO. 1 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them to the brake
piston.
(b) Press the brake piston into the brake cylinder with both hands to
install it.
NOTICE:
Be careful not to damage the O-rings.
18. INSTALL NO. 1 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
(a) Install the No. 1 brake cylinder with No. 1 brake piston and the brake piston return spring to the
transmission case.
transmission case.
19. INSTALL NO. 1 BRAKE PISTON RETURN SPRING SNAP
RING
(a) Using SST, compress the return spring and install the No. 1
brake piston return spring snap ring.
SST: 09351-40010
09351-04010
09351-04030
09351-04040
09351-04050
20. SELECT NO. 1 BRAKE FLANGE
(a) Using a vernier caliper, measure distance A (from the step in the
HINT:
Standard distance A: 19.74 to 20.22 mm (0.777 to 0.796 in.)
(b) Assemble the 4 plates, 4 discs and flange (thickness: 2.15 to
2.25 mm (0.0846 to 0.0886 in.)) as shown in the illustration,
and using a vernier caliper, measure distance B in the illustration
at both ends across the diameter, and calculate the average.
HINT:
Standard distance B: 18.93 to 19.39 mm (0.745 to 0.763 in.)
0.0339 in.).
Flange Thickness:
NO.
THICKNESS
0
1.95 to 2.05 mm (0.0768 to 0.0807 in.)
1
2.15 to 2.25 mm (0.0846 to 0.0886 in.)
2
2.35 to 2.45 mm (0.0925 to 0.0965 in.)
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
NO.
THICKNESS
3
2.55 to 2.65 mm (0.100 to 0.104 in.)
21. INSTALL NO. 1 BRAKE DISC
(a) Install the 4 plates, 4 discs and flange.
Install in order:
P - D - P - D - P - D - P - D - F
HINT:
P = Plate
D = Disc
F = Flange
22. INSTALL CENTER PLANETARY RING GEAR
(a) Install the center planetary ring gear and front planetary ring gear flange to the front planetary ring gear.
(b) Using a screwdriver, install the snap ring.
23. INSTALL FRONT PLANETARY RING GEAR
(a) Install the thrust needle roller bearing and front planetary ring
gear to the case.
Thrust Needle Roller Bearing Diameter:
ITEM
INSIDE
OUTSIDE
Bearing
G
55.76 to 55.79 mm (2.19 to
2.20 in.)
76.1 to 76.35 mm (3.00 to
3.01 in.)
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
24. INSTALL FRONT PLANETARY GEAR ASSEMBLY
(a) Install the thrust washer and thrust needle roller bearing.
(b) Coat the thrust bearing race with petroleum jelly, and install it to the front planetary ring gear.
Thrust Needle Roller Bearing and Race Diameter:
ITEM
INSIDE
OUTSIDE
Bearing F
43.4 to 43.6 mm (1.71 to 1.72 in.)
58.0 to 58.25 mm (2.28 to 2.29 in.)
Race F
38.0 to 38.2 mm (1.49 to 1.50 in.)
56.50 to 57.0 mm (2.22 to 2.24 in.)
(c) Install the front planetary gear assembly and 1-way clutch inner
race to the case.
25. INSTALL NO. 3 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them to the No. 3 brake piston.
(b) Press the No. 3 brake cylinder into the No. 3 brake piston with both hands to install it.
NOTICE:
Be careful not to damage the O-rings.
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст