Toyota Tundra (2015 year). Manual — part 935
RESULT
CONTENTS
DETAIL
AREAS TO BE CHECKED
assembly and "Bluetooth" device.
operate them again.
Page Time Out
Could not find a "Bluetooth" device
near the radio and display receiver
assembly.
Bring the "Bluetooth" device near the radio
and display receiver assembly and perform
"Bluetooth" connection again.
"Bluetooth" connection could not be
established due to wave interference
around the vehicle
Check for wave interference and perform
"Bluetooth" connection again.
"Bluetooth" device was outside the
communication area.
Bring the "Bluetooth" device near the radio
and display receiver assembly and perform
"Bluetooth" connection again.
"Bluetooth" setting on the
"Bluetooth" device was off.
Change the "Bluetooth" setting to on and
perform "Bluetooth" connection again.
"Bluetooth" device was off.
Turn the "Bluetooth" device on and perform
"Bluetooth" connection again.
A malfunction occurred in the
"Bluetooth" device.
Restart the "Bluetooth" device and operate it
again.
ACL Link
Disconnection
"Bluetooth" connection was
disconnected by operating the
"Bluetooth" device.
Perform "Bluetooth" connection again.
"Bluetooth" connection could not be
established due to wave interference
around the vehicle.
Check for wave interference and perform
"Bluetooth" connection again.
"Bluetooth" device was outside the
communication area.
Bring the "Bluetooth" device near the radio
and display receiver assembly and perform
"Bluetooth" connection again.
"Bluetooth" setting on the
"Bluetooth" device was off.
Change the "Bluetooth" setting to on and
perform "Bluetooth" connection again.
"Bluetooth" device was off.
Turn the "Bluetooth" device on and perform
"Bluetooth" connection again.
A malfunction occurred in the
"Bluetooth" device.
Restart the "Bluetooth" device and operate it
again.
SDP Error
HFP was disabled on the "Bluetooth"
device.
Enable HFP on the "Bluetooth" device and
perform "Bluetooth" connection again.
"Bluetooth" device which operation
had not been confirmed was used
Check that the "Bluetooth" device is
hands-free compatible and its operation has
been confirmed
.
Other Error
An error other than above occurred.
After turning the ignition switch off and back
to ON again, perform "Bluetooth" device
registration again.
Auto Connect
Failure (AVP)
Manual
Connect
Failure (AVP)
Time Out
Could not perform "Bluetooth"
connection properly
Check that the "Bluetooth" device
is in the cabin
Check that the "Bluetooth" device
is not connected to another device
using the "Bluetooth" connection
Restart the "Bluetooth" device and
operate it again
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: OPERATION ...
RESULT
CONTENTS
DETAIL
AREAS TO BE CHECKED
Authentication
Error
receiver assembly and "Bluetooth"
device failed
If "Bluetooth" connection failed again even
though the "Bluetooth" connection was
performed, perform registration again
A verification error occurred between
the radio and display receiver
assembly and "Bluetooth" device
Restart the radio and display receiver
assembly and "Bluetooth" device, and
operate them again
Page Time Out
Could not find a "Bluetooth" device
near the radio and display receiver
assembly
Bring the "Bluetooth" device near the radio
and display receiver assembly and perform
"Bluetooth" connection again
"Bluetooth" connection could not be
established due to wave interference
around the vehicle
Check for wave interference and perform
"Bluetooth" connection again
"Bluetooth" device was outside the
communication area
Bring the "Bluetooth" device near the radio
and display receiver assembly and perform
"Bluetooth" connection again
"Bluetooth" setting on the
"Bluetooth" device was off
Change the "Bluetooth" setting to on and
perform "Bluetooth" connection again
"Bluetooth" device was off
Turn the "Bluetooth" device on and perform
"Bluetooth" connection again
A malfunction occurred in the
"Bluetooth" device
Restart the "Bluetooth" device and operate it
again
ACL Link
Disconnection
"Bluetooth" connection was
disconnected by operating the
"Bluetooth" device
Perform "Bluetooth" connection again
"Bluetooth" connection could not be
established due to wave interference
around the vehicle
Check for wave interference and perform
"Bluetooth" connection again
"Bluetooth" device was outside the
communication area
Bring the "Bluetooth" device near the radio
and display receiver assembly and perform
"Bluetooth" connection again
"Bluetooth" setting on the
"Bluetooth" device was off
Change the "Bluetooth" setting to on and
perform "Bluetooth" connection again
"Bluetooth" device was off
Turn the "Bluetooth" device on and perform
"Bluetooth" connection again
A malfunction occurred in the
"Bluetooth" device
Restart the "Bluetooth" device and operate it
again
SDP Error
AVP was disabled on the "Bluetooth"
device
Enable AVP on the "Bluetooth" device and
perform "Bluetooth" connection again
"Bluetooth" device which operation
had not been confirmed was used
Check that the "Bluetooth" device is
"Bluetooth" audio compatible and its
operation has been confirmed
Other Error
An error other than above occurred
After turning the ignition switch off and back
to ON again, perform "Bluetooth" device
registration again
Manual Connect Cancel
(HFP)
No Error
Connection was interrupted by
operating the radio and display
receiver assembly or "Bluetooth"
device
-
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: OPERATION ...
RESULT
CONTENTS
DETAIL
AREAS TO BE CHECKED
Manual Connect Cancel
(AVP)
No Error
Connection was interrupted by
operating the radio and display
receiver assembly or "Bluetooth"
device
-
History Type: Disconnection
RESULT
CONTENTS
DETAIL
AREAS TO BE CHECKED
Disconnection
Complete (HFP)
Link Loss
The "Bluetooth" device was moved
communication area
"Bluetooth" connection was disconnected
due to wave interference around the
vehicle
Check for wave interference and perform
"Bluetooth" connection again
A malfunction occurred in the
"Bluetooth" device
Restart the "Bluetooth" device and operate
it again
Disconnection
from Partner
"Bluetooth" connection was disconnected
by operating the "Bluetooth" device
-
Disconnection
from Self
"Bluetooth" connection was disconnected
by operating the radio and display
receiver assembly
-
Other Error
An error other than above occurred
After turning the ignition switch off and
back to ON again, perform "Bluetooth"
device registration again
Disconnection
Complete (AVP)
Link Loss
The "Bluetooth" device was moved
communication area
"Bluetooth" connection was disconnected
due to wave interference around the
vehicle
Check for wave interference and perform
"Bluetooth" connection again
A malfunction occurred in the
"Bluetooth" device
Restart the "Bluetooth" device and operate
it again
Disconnection
from Partner
"Bluetooth" connection was disconnected
by operating the "Bluetooth" device
-
Disconnection
from Self
"Bluetooth" connection was disconnected
by operating the radio and display
receiver assembly
-
Other Error
"Bluetooth" connection was disconnected
by operating the radio and display
receiver assembly
After turning the ignition switch off and
back to ON again, perform "Bluetooth"
device registration again
History Type: Send
RESULT
CONTENTS
DETAIL
AREAS TO BE CHECKED
Success
No Error
Call was made properly.
-
Failure
Out of
Service
Outside the cellular phone service area
Move the vehicle into a cellular phone
service area, check that the "Bluetooth"
device is connected to the vehicle and
operate the device again
Redial
Regulation
Restart the "Bluetooth" device and operate it
again
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: OPERATION ...
RESULT
CONTENTS
DETAIL
AREAS TO BE CHECKED
Other Error
Could not make a hands-free call due to a "Bluetooth"
device malfunction
Restart the "Bluetooth" device and operate it
again
Could not make a hands-free call due to a radio and
display receiver assembly malfunction
After turning the ignition switch off and back
to ON again, perform "Bluetooth" device
registration again
Could not make a hands-free call from the radio and
display receiver assembly
Restart the "Bluetooth" device and operate it
again
(b) Clear "Bluetooth" connection history.
.
Cleared using the Techstream.
Cleared using the system check mode screen.
Cleared using the unit check mode screen.
11. ENTUNE RESET PROCEDURE (w/ Entune Function)
(a) Duplicate the problem symptom.
(b) Check for DTCs and repair the systems for which any DTCs are output
.
(c) Check cellular phone compatibility.
(1) Go to Toyota website and check if the cellular phone/vehicle is compatible.
(2) If the cellular phone is not compatible, recommend to the customer a compatible cellular phone.
(d) Delete all paired devices from the cellular phone.
(1) The procedure varies based on phone model. Contact the service provider or cellular phone manufacturer if assistance
is required.
(e) Remove the Entune app from the phone.
NOTICE:
Only perform this step if the customer is present and approves.
(1) The procedure varies based on phone model. Contact the service provider or cellular phone manufacturer if assistance
is required.
(f) Reset the phone.
NOTICE:
Only perform this step if the customer is present and approves.
(1) Turn off the phone and remove the battery for 15 seconds. For instructions on how to reset cellular devices, refer to
the appropriate manufacturer's website.
(g) Reinstall the Entune app on the phone. (If removed.)
(1) The procedure varies based on phone model. Contact the service provider or cellular phone manufacturer if assistance
is required.
(h) Delete all personal data from the head unit.
(1) Delete all personal data from the head unit.
NOTICE:
Only perform this step if the customer is present and approves.
HINT:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст