Toyota Tundra (2015 year). Manual — part 2768
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000030KT00IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic
Steering Column): COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
ILLUSTRATION
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (...
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000030KU00MX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic
Steering Column): REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the
battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal
notice before proceeding with work
.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent
airbag and seat belt pretensioner activation.
3. REMOVE UPPER STEERING COLUMN COVER
(a) Remove the 2 screws.
HINT:
Turn the steering wheel to the right and left as necessary to
remove the 2 screws.
(b) Detach the 4 clips.
(c) Detach the claw to remove the upper steering column cover.
4. REMOVE LOWER STEERING COLUMN COVER
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (...
(a) Detach the 2 claws to remove the lower steering column cover.
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
7. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
8. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the 2 ECU connectors.
(b) Remove the 2 screws and ECU.
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст