Toyota Tundra (2015 year). Manual — part 2571
sequence shown in the illustration.
(c) Uniformly loosen and remove the 18 bearing cap bolts in the
sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the camshaft level.
(d) Remove the 6 bearing caps.
HINT:
Arrange the removed parts in the correct order.
(e) Remove the No. 3 and No. 4 camshafts.
HINT:
Arrange the removed parts in the correct order.
35. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH
3UR-FE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; ...
(a) Remove the camshaft housing by prying between the
cylinder head and camshaft housing with a screwdriver.
NOTICE:
HINT:
Tape the screwdriver tip before use.
36. REMOVE CAMSHAFT BEARING CAP RH
sequence shown in the illustration.
(c) Uniformly loosen and remove the 18 bearing cap bolts in the
sequence shown in the illustration.
NOTICE:
Uniformly loosen the bolts while keeping the camshaft level.
(d) Remove the 6 bearing caps.
HINT:
Arrange the removed parts in the correct order.
3UR-FE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; ...
(e) Remove the No. 1 and No. 2 camshafts.
HINT:
Arrange the removed parts in the correct order.
37. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH
(a) Remove the camshaft housing by prying between the
cylinder head and camshaft housing with a screwdriver.
NOTICE:
HINT:
Tape the screwdriver tip before use.
38. REMOVE VALVE ROCKER ARM SUB-ASSEMBLY
(a) Remove the 32 valve rocker arms from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
39. REMOVE VALVE LASH ADJUSTER ASSEMBLY
(a) Remove the 32 valve lash adjusters from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
40. REMOVE VALVE STEM CAP
(a) Remove the 32 valve stem caps from the cylinder head.
HINT:
Arrange the removed parts in the correct order.
41. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH
42. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH
43. REMOVE CYLINDER HEAD GASKET LH
44. REMOVE CYLINDER HEAD GASKET RH
45. REMOVE CYLINDER BLOCK WATER JACKET
SPACER
(a) Remove the 2 water jacket spacers from the cylinder head.
NOTICE:
Be sure to remove the water jacket spacers. If not, they may
fall and become damaged when the cylinder block is
inverted.
46. REMOVE OIL RETURN PIPE GASKET
3UR-FE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; ...
(a) Using a screwdriver, pry out the oil return pipe gasket.
HINT:
Tape the screwdriver tip before use.
47. REMOVE VENTILATION PIPE GASKET
(a) Using a screwdriver, pry out the ventilation pipe gasket.
HINT:
Tape the screwdriver tip before use.
48. REMOVE NO. 1 HEAT EXCHANGER COVER
(a) Remove the 12 bolts and 2 nuts.
(b) Remove the heat exchanger by prying between the heat
exchanger and cylinder block with a screwdriver.
HINT:
Tape the screwdriver tip before use.
49. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY
(a) Remove the 14 bolts and 2 nuts.
3UR-FE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст