Toyota Tundra (2015 year). Manual — part 2476
Text in Illustration
*a
Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Slide Motor LH))
connector, and check that the front vertical motor LH
operates smoothly as follows.
OK:
CONDITION
SWITCH CONDITION
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Downward
If the result is not as specified, replace the front seat cushion
frame sub-assembly LH.
Text in Illustration
*1 Terminal 1
*2 Terminal 2
*a
Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Front Vertical Motor
LH))
check that the lifter motor LH operates smoothly as follows.
OK:
CONDITION
SWITCH CONDITION
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Upward
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Downward
If the result is not as specified, replace the front seat cushion
frame sub-assembly LH.
Text in Illustration
SEAT: FRONT POWER SEAT MOTOR ASSEMBLY: INSPECTION; 20...
*a
Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly LH (Lifter Motor LH))
5. INSPECT FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (w/ Leg Support Adjustment
Switch)
connector, and check that the leg support adjustment motor
operates smoothly as follows.
OK:
CONDITION
SWITCH CONDITION
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Backward
If the result is not as specified, replace the front seat cushion
panel sub-assembly.
Text in Illustration
*a
Component without wire harness connected
(Front Seat Cushion Panel Sub-assembly (Leg Support Adjustment
Motor))
6. INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH
and check that the reclining motor RH operates smoothly as
follows.
OK:
CONDITION
SWITCH CONDITION
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Backward
If the result is not as specified, replace the front seatback
frame sub-assembly RH.
Text in Illustration
SEAT: FRONT POWER SEAT MOTOR ASSEMBLY: INSPECTION; 20...
*1 Terminal 1
*2 Terminal 2
*a
Component without wire harness connected
(Front Seatback Frame Sub-assembly RH (Reclining Motor RH))
7. INSPECT FRONT SEAT CUSHION FRAME SUB-ASSEMBLY RH
check that the slide motor RH operates smoothly as follows.
OK:
CONDITION
SWITCH CONDITION
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 3
Forward
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 4
Backward
If the result is not as specified, replace the front seat cushion
frame sub-assembly RH.
Text in Illustration
*a
Component without wire harness connected
(Front Seat Cushion Frame Sub-assembly RH (Slide Motor RH))
SEAT: FRONT POWER SEAT MOTOR ASSEMBLY: INSPECTION; 20...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002XE100YX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT: FRONT POWER SEAT MOTOR ASSEMBLY: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. INSTALL FRONT SEAT CUSHION SHIELD WIRE LH
2. INSTALL FRONT SEAT CUSHION SHIELD WIRE RH (for Front Passenger Side)
3. INSTALL UPPER NO. 4 SEAT TRACK COVER
4. INSTALL UPPER NO. 3 SEAT TRACK COVER
HINT:
Use the same procedure described for the upper No. 4 seat track cover.
5. INSTALL UPPER SEAT TRACK COVER
6. INSTALL FRONT LOWER SEAT CUSHION SHIELD LH (for Driver Side)
7. INSTALL FRONT LOWER SEAT CUSHION SHIELD RH (for Driver Side)
HINT:
Use the same procedure described for the LH side.
8. INSTALL FRONT LOWER SEAT CUSHION SHIELD LH (for Front Passenger Side)
9. INSTALL FRONT LOWER SEAT CUSHION SHIELD RH (for Front Passenger Side)
HINT:
Use the same procedure described for the LH side.
10. INSTALL FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH
(a) Install the front seat cushion panel sub-assembly with the 4 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
12. INSTALL FRONT SEAT CUSHION WIRE LH (for Driver Side)
13. INSTALL FRONT SEAT CUSHION WIRE RH (for Front Passenger Side)
14. INSTALL SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)
SEAT: FRONT POWER SEAT MOTOR ASSEMBLY: INSTALLATION; ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст