Toyota Tundra (2015 year). Manual — part 662
5. INSPECT SHIFT SOLENOID VALVE S4
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
Shift solenoid valve S4 connector
terminal - Shift solenoid valve S4
body
20°C
(68°F)
11 to 15 Ω
solenoid valve body. Then check that the valve moves and
makes an operating noise.
OK:
Valve moves and makes an operating noise.
If the result is not as specified, replace the solenoid valve.
6. INSPECT SHIFT SOLENOID VALVE SL2
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
5.0 to 5.6 Ω
(b) Connect the battery's positive (+) lead with a 21 W bulb to
operating noise.
OK:
Valve moves and makes an operating noise.
If the result is not as specified, replace the solenoid valve.
AB60E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY:...
7. INSPECT SHIFT SOLENOID VALVE SR
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
Shift solenoid valve SR connector
terminal - Shift solenoid valve SR
body
20°C
(68°F)
11 to 15 Ω
solenoid valve body. Then check that the valve moves and
makes an operating noise.
OK:
Valve moves and makes an operating noise.
If the result is not as specified, replace the solenoid valve.
8. INSPECT SHIFT SOLENOID VALVE SLT
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
5.0 to 5.6 Ω
(b) Connect the battery's positive (+) lead with a 21 W bulb to
operating noise.
OK:
Valve moves and makes an operating noise.
If the result is not as specified, replace the solenoid valve.
AB60E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY:...
9. INSPECT SHIFT SOLENOID VALVE SLU
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
5.0 to 5.6 Ω
(b) Connect the battery's positive (+) lead with a 21 W bulb to
operating noise.
OK:
Valve moves and makes an operating noise.
If the result is not as specified, replace the solenoid valve.
AB60E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY:...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000000O9M07BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY: REASSEMBLY; 2015 MY Tundra [08/2014 -
]
REASSEMBLY
1. INSTALL SHIFT SOLENOID VALVE S3
(a) Install the shift solenoid valve with the bolt.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
2. INSTALL SHIFT SOLENOID VALVE S2
3. INSTALL SHIFT SOLENOID VALVE S4
(a) Install the shift solenoid valve with the bolt.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
4. INSTALL SHIFT SOLENOID VALVE S1
(a) Install the shift solenoid valve and valve body wire harness
clamp with the bolt.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
5. INSTALL SHIFT SOLENOID VALVE SR
AB60E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст