Toyota Tundra (2015 year). Manual — part 2118
(b) w/ Retract Mirror:
Check the retractable mirror's movement.
(1) For each position: Disconnect the battery, set the mirror
position by hand, connect the battery, and check the
retractable mirror's movement.
OK:
MEASUREMENT
CONDITION
MIRROR POSITION
SPECIFIED
CONDITION
Battery positive (+)
→ Terminal 7 (MR)
Battery negative (-)
→ Terminal 8 (MF)
Forward position (A)
Moves from (A) to
retracted position
(E)
Battery positive (+)
→ Terminal 8 (MF)
Battery negative (-)
→ Terminal 7 (MR)
Forward position (A)
Does not move
Battery positive (+)
→ Terminal 7 (MR)
Battery negative (-)
→ Terminal 8 (MF)
Position between
forward position (A) and
driving position (C)
Moves from (B) to
retracted position
(E)
Battery positive (+)
→ Terminal 8 (MF)
Battery negative (-)
→ Terminal 7 (MR)
Position between
forward position (A) and
driving position (C)
Moves from (B) to
forward position (A)
Battery positive (+)
→ Terminal 7 (MR)
Battery negative (-)
→ Terminal 8 (MF)
Driving position (C)
Moves from (C) to
retracted position
(E)
Battery positive (+)
→ Terminal 8 (MF)
Battery negative (-)
→ Terminal 7 (MR)
Driving position (C)
Does not move
Battery positive (+)
→ Terminal 7 (MR)
Battery negative (-)
→ Terminal 8 (MF)
Position between driving
position (C) and
retracted position (E)
Moves from (D) to
retracted position
(E)
Battery positive (+)
→ Terminal 8 (MF)
Battery negative (-)
→ Terminal 7 (MR)
Position between driving
position (C) and
retracted position (E)
Moves from (D) to
driving position (C)
Battery positive (+)
→ Terminal 7 (MR)
Battery negative (-)
→ Terminal 8 (MF)
Retracted position (E)
Does not move
MIRROR: OUTER REAR VIEW MIRROR: INSPECTION; 2015 MY ...
MEASUREMENT
CONDITION
MIRROR POSITION
SPECIFIED
CONDITION
Battery positive (+)
→ Terminal 8 (MF)
Battery negative (-)
→ Terminal 7 (MR)
Retracted position (E)
Moves from (E) to
driving position (C)
NOTICE:
Disconnect and reconnect the battery between each mirror
position check.
Do not apply battery voltage when moving the mirror by hand
into each mirror position.
Text in Illustration
*a
Component without harness connected
(Outer Rear View Mirror Assembly RH)
If the result is not as specified, replace the outer rear view
mirror assembly RH.
(c) w/ EC Mirror:
Check the EC mirror operation.
NOTICE:
(2) Apply 1.5 V dry-cell battery voltage and check operation of
the mirror face as shown in the table and illustration.
OK:
TESTER CONNECTION
SPECIFIED CONDITION
1.5 V dry-cell battery positive (+) →
Terminal 14 (EC+)
1.5 V dry-cell battery negative (-) →
Terminal 13 (EC-)
Mirror surface becomes
dark
Text in Illustration
*a
Bright
*b
Dark
*c
Component without harness connected
(Outer Rear View Mirror Assembly RH)
If the result is not as specified, replace the outer rear view
mirror assembly RH.
MIRROR: OUTER REAR VIEW MIRROR: INSPECTION; 2015 MY ...
(d) w/ Outer Mirror Light:
Check the door mirror foot light.
OK:
TESTER CONNECTION
SPECIFIED CONDITION
Battery positive (+) → Terminal 6
(MLP)
Battery negative (-) → Terminal 5
(MLP-)
Door mirror foot light
illuminates
Text in Illustration
*a
Component without harness connected
(Outer Rear View Mirror Assembly RH)
If the result is not as specified, replace the outer mirror light
assembly RH.
(e) w/ Mirror Heater:
Check the mirror heater.
OK:
MEASUREMENT CONDITION
SPECIFIED CONDITION
Battery positive (+) → Terminal 1 (+)
Battery negative (-) → Terminal 2 (-)
Mirror becomes warm
Text in Illustration
*a
Component without harness connected
(Outer Rear View Mirror Assembly RH)
HINT:
It will take a short time for the mirror to become warm.
If the result is not as specified, replace the outer rear view
mirror assembly RH.
4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (for Extended Type)
MIRROR: OUTER REAR VIEW MIRROR: INSPECTION; 2015 MY ...
(a) Check the outer mirror motor operation.
MEASUREMENT CONDITION
SPECIFIED CONDITION
Battery positive (+) → Terminal 10 (MV)
Battery negative (-) → Terminal 11 (M+)
Turns upward (A)
Battery positive (+) → Terminal 11 (M+)
Battery negative (-) → Terminal 10 (MV)
Turns downward (B)
Battery positive (+) → Terminal 12 (MH)
Battery negative (-) → Terminal 11 (M+)
Turns left (C)
Battery positive (+) → Terminal 11 (M+)
Battery negative (-) → Terminal 12 (MH)
Turns right (D)
Text in Illustration
*a
Component without harness connected
(Outer Rear View Mirror Assembly RH)
If the result is not as specified, replace the outer rear view
mirror assembly RH.
(b) Check the door mirror turn indicator.
OK:
TESTER CONNECTION
SPECIFIED CONDITION
Battery positive (+) → Terminal 4
(TRNR)
Battery negative (-) → Terminal 3
(GND)
Door mirror turn indicator
illuminates
Text in Illustration
*a
Component without harness connected
(Outer Rear View Mirror Assembly RH)
If the result is not as specified, replace the outer rear view
mirror assembly RH.
MIRROR: OUTER REAR VIEW MIRROR: INSPECTION; 2015 MY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст