Toyota Tundra (2015 year). Manual — part 972
OK
A
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
3.
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY
(a) Reconnect the J122 radio and display receiver assembly
connector.
(b) Disconnect the No. 1 stereo jack adapter assembly connector.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
J100-1 (UPI) - J100-4 (UJSG)
Ignition switch ACC
4.5 to 5.5 V
Text in Illustration
*a
Result
RESULT
PROCEED TO
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
C
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: USB Audio Sys...
NEXT
4.
FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK
(a) Delete all files in the USB device or "iPod" and format/ restore it.
NOTICE:
Formatting a USB device or restoring an "iPod" erases all music on the device. Make sure that back up
music data is available before performing this operation.
(b) Save the data again and check if it can be played on the in-vehicle device.
OK:
Malfunction disappears.
NG
GO TO STEP 5
OK
END (USB DEVICE OR "iPod" IS DEFECTIVE)
5.
REPLACE USB DEVICE OR "iPod"
(a) Turn the ignition switch off.
(b) Turn the ignition switch to ACC.
(c) Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
HINT:
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If
the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
Refer to System Description for compatible formats and versions
.
6.
CHECK USB DEVICE OR "iPod"
(a) Check if USB device or "iPod" is recognized by radio receiver, or if information such as track, artist
and album names is displayed on screen.
OK:
USB device or "iPod" is recognized or track information such as track, artist and album names is displayed.
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN
PROBLEM SYMPTOMS TABLE
OK
USB DEVICE OR "iPod" WAS INCOMPATIBLE OR
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: USB Audio Sys...
DEFECTIVE
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: USB Audio Sys...
OK
Last Modified: 9-16-2014
6.6 J
Doc ID: RM0000020RR0REX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Black Screen; 2015 MY Tundra [08/2014 - ]
Black Screen
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK DISPLAY SETTING
(a) Check that the display is not in screen off mode.
OK:
The display setting is not in screen off mode.
NG
CHANGE SCREEN TO SCREEN ON MODE
2.
CHECK IMAGE QUALITY SETTING
(a) Check that the screen color quality can be set.
OK:
Setting is possible.
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN
PROBLEM SYMPTOMS TABLE
OK
SET SCREEN COLOR QUALITY TO NORMAL
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Black Screen; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст