Toyota Tundra (2015 year). Manual — part 810
(a) Using SST, remove the companion flange from the differential
carrier.
SST: 09950-30012
09951-03010
09953-03010
09954-03010
09955-03030
09956-03020
Text in Illustration
*a
Turn
*b
Hold
7. REMOVE FRONT DIFFERENTIAL CARRIER OIL SEAL
(a) Using SST, remove the oil seal.
SST: 09308-10010
8. REMOVE FRONT DIFFERENTIAL DRIVE PINION OIL SLINGER
9. REMOVE FRONT DIFFERENTIAL CROSS SHAFT BEARING RETAINER
(a) Remove the bolts B and front differential front support assembly
LH.
(b) Remove the bolts A.
(c) Using a plastic-faced hammer, tap out the bearing retainer.
10. REMOVE DIFFERENTIAL CASE ASSEMBLY
(a) Remove the differential case from the differential carrier.
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
11. REMOVE DIFFERENTIAL DRIVE PINION
(a) Set the differential carrier to an overhaul stand as shown in the
illustration.
Text in Illustration
*a
Block
(b) Using a press, press out the drive pinion.
NOTICE:
Do not drop the drive pinion.
12. REMOVE FRONT DRIVE PINION FRONT RADIAL BALL BEARING
(a) Remove the bearing (inner race) from the differential carrier.
13. REMOVE FRONT DIFFERENTIAL DRIVE PINION BEARING SPACER
14. REMOVE FRONT DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR
(a) Remove the 2 bolts and oil deflector.
15. REMOVE FRONT DIFFERENTIAL UNION
(a) Remove the front differential union from the differential carrier.
16. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
(a) Using SST and a press, press out the bearing (inner race).
SST: 09950-00020
If the drive gear or ring gear is damaged, replace them as a set.
17. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
(a) Using a brass bar and hammer, tap out the bearing (outer race)
and washer.
18. REMOVE FRONT DRIVE PINION FRONT RADIAL BALL BEARING
(a) Using SST and hammer, tap out the bearing (outer race).
SST: 09950-70010
09951-07100
SST: 09950-60010
09951-00450
SST: 09950-60020
09951-00710
09952-06010
19. REMOVE FRONT DIFFERENTIAL CASE BEARING
HINT:
Measure the plate washer and note its thickness.
Tag the bearing outer races to show the location for reassembly.
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
(a) Using SST and a press, press out the bearing (outer race) and
plate washer from the bearing retainer.
SST: 09950-60020
09951-00680
SST: 09950-70010
09951-07150
Text in Illustration
*1
Plate Washer
(b) Using SST and a press, press out the bearing (outer race) and
plate washer from the differential carrier.
SST: 09950-60020
09951-00680
SST: 09950-70010
09951-07150
Text in Illustration
*1
Plate Washer
20. REMOVE DIFFERENTIAL RING GEAR
(a) Place matchmarks on the ring gear and differential case.
Text in Illustration
*a
Matchmark
(b) Remove the 12 bolts.
(c) Using a plastic-faced hammer, tap on the ring gear to separate it from the differential case.
21. REMOVE FRONT DIFFERENTIAL CASE BEARING
(a) Using SST, remove the 2 bearings (inner race).
SST: 09950-60010
09951-00550
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04010
09955-04061
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (f...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст