Toyota Tundra (2015 year). Manual — part 481

Last Modified: 9-16-2014

6.6 A

Doc ID: RM0000013EZ06TX

Model Year: 2015

Model: Tundra

Prod Date Range: [08/2014 - ]

Title: A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION UNIT: DISASSEMBLY; 2015 MY Tundra

[08/2014 - ]

DISASSEMBLY

1. REMOVE TRANSMISSION CONTROL SHAFT LEVER RH

(a) Remove the nut, spring washer and control shaft lever RH.

2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(c) Remove the park/neutral position switch.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral

position switch as the detent spring may become detached from the manual valve lever shaft.

3. REMOVE OIL COOLER TUBE UNION

(a) Remove the 2 oil cooler tube unions.

(b) Remove the O-ring from each oil cooler tube union.

A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...

4. REMOVE SPEED SENSOR

(a) Remove the 2 bolts and 2 speed sensors.

(b) Remove the O-ring from each sensor.

5. REMOVE AUTOMATIC TRANSMISSION BREATHER TUBE

(a) Remove the 2 bolts.

(b) Remove the breather tube.

(c) Remove the O-ring from the tube.

6. REMOVE AUTOMATIC TRANSMISSION HOUSING

(a) Remove the 10 bolts and transmission housing.

7. REMOVE REAR TRANSFER ADAPTER

(a) Remove the 8 bolts and transfer adapter.

HINT:

Use a brass bar and hammer to remove the transfer adapter.

(b) Using a screwdriver, remove the transfer adapter hole snap

ring.

A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...

8. REMOVE TRANSFER CASE ADAPTER REAR OIL SEAL

(a) Using a screwdriver, pry out the oil seal.

NOTICE:

Be careful not to damage the transfer adapter.

HINT:

(a) Install the transmission case to an overhaul attachment.

10. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

(a) Remove the drain plug and gasket.

(b) Remove the overflow plug and gasket.

(c) Remove the 20 bolts and oil pan.

NOTICE:

Do not turn the transmission over as this will contaminate the

12. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

(a) Turn over the transmission.

(b) Remove the 4 bolts and oil strainer from the valve body.

(c) Remove the O-ring from the oil strainer.

13. REMOVE TRANSMISSION WIRE

A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...

(a) Remove the 2 bolts and 2 temperature sensor clamps.

(b) Disconnect the 2 ATF temperature sensors.

(c) Disconnect the 9 solenoid valve connectors.

(d) Detach the wire harness from the 2 clamps.

(e) Remove the bolt and pull out the transmission wire.

(f) Remove the O-ring from the transmission wire connector.

14. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

(a) Remove the bolt, detent spring cover and detent spring.

(b) Remove the 19 bolts and valve body.

15. REMOVE CHECK BALL BODY

(a) Remove the check ball body and spring.

A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...