Toyota Tundra (2015 year). Manual — part 1469
Last Modified: 9-16-2014
6.6 L
Doc ID: RM000000PD80KVX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: PRECAUTION; 2015 MY Tundra [08/2014 - ]
PRECAUTION
CAUTION:
When using the Techstream, observe the following items for safety reasons:
Read its instruction books before using the Techstream.
Prevent the Techstream cable from being caught on the pedals, shift lever and steering wheel when
driving with the Techstream connected to the vehicle.
When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One person
drives the vehicle, and the other operates the Techstream.
NOTICE:
.
Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM
.
Perform RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine
assembly or ECM
.
Perform REGISTRATION (VIN registration) when replacing the ECM
.
HINT:
RESET MEMORY cannot be completed by only removing the battery.
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: PRECAUTI...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000000PDC0N4X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: DEFINITION OF TERMS; 2015 MY Tundra [08/2014 -
]
DEFINITION OF TERMS
TERMS
DEFINITION
Monitor Description
Related DTCs
Typical Enabling
Condition
Preconditions that allow ECM to detect malfunctions.
With all preconditions satisfied, ECM sets DTC when monitored value(s) exceeds
malfunction threshold(s).
single malfunction detection process.
Each sensor and component monitored in turn, when previous detection operation
completed.
Required
Sensor/Components
Sensors and components used by ECM to detect each malfunction.
"Once per driving cycle" means ECM only performs checks for that malfunction
once during single driving cycle.
"Continuous" means ECM performs checks for that malfunction whenever enabling
conditions met.
Duration
Minimum time for which ECM must detect continuous deviation in monitored
value(s) in order to set DTC. Timing begins when Typical Enabling Conditions met.
Malfunction Thresholds
Value beyond which ECM determines malfunctions exist and sets DTCs.
MIL Operation
"2 driving cycle" means ECM illuminates MIL if same malfunction detected second
time during next sequential driving cycle.
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: DEFINITIO...
Last Modified: 9-16-2014
6.6 R
Doc ID: RM0000026V4056X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: PARTS LOCATION; 2015 MY Tundra [08/2014 -
]
PARTS LOCATION
ILLUSTRATION
ILLUSTRATION
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: PARTS LO...
ILLUSTRATION
3UR-FBE ENGINE CONTROL SYSTEM: SFI SYSTEM: PARTS LO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст