Toyota Tundra (2015 year). Manual — part 184
ILLUSTRATION
ILLUSTRATION
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front S...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000001PYF09WX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): REMOVAL; 2015 MY Tundra
[08/2014 - ]
REMOVAL
1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
(a) for Standard:
(b) w/ Off Road Package:
2. REMOVE FRONT END PANEL LH
3. REMOVE FRONT END PANEL RH
4. REMOVE FRONT BUMPER CENTER UPPER RETAINER
5. REMOVE FRONT BUMPER COVER
6. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Steel Type Bumper)
(a) Remove the No. 1 ultrasonic sensor retainer as shown in the
illustration.
HINT:
The illustration shows the No. 1 ultrasonic sensor retainer for the
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front S...
(a) Remove the No. 1 ultrasonic sensor as shown in the illustration.
HINT:
The illustration shows the No. 1 ultrasonic sensor for the LH. The
(a) Detach the 4 claws and remove the No. 1 ultrasonic sensor as shown in the illustration.
HINT:
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front S...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000005L2S001X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): INSPECTION; 2015 MY Tundra
[08/2014 - ]
INSPECTION
1. INSPECT NO. 1 ULTRASONIC SENSOR
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 (BI) - 5 (EI)
Always
10 kΩ or higher
1 (BI) - 2 (BO)
Always
10 kΩ or higher
3 (SI) - 4 (SO)
Always
Below 1 Ω
5 (EI) - 6 (EO)
Always
Below 1 Ω
Text in Illustration
*a
Component without harness connected:
(No. 1 Ultrasonic Sensor)
If the result is not as specified, replace the No. 1 ultrasonic
sensor.
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front S...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст