Toyota Tundra (2015 year). Manual — part 645
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002YBA01EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY (for Column Shift Type): DISASSEMBLY;
2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE COLUMN SHIFT SHIFTING BELLCRANK
ASSEMBLY
(a) Remove the bolt and shifting bellcrank from the column shift
control shift lever retainer.
2. REMOVE COLUMN SHIFT LEVER COMPRESSION SPRING
(a) Remove the bolt and spring from the column shift control shift
lever retainer.
3. REMOVE SHIFT LEVER PLATE SUB-ASSEMBLY
(a) Disconnect the transmission control switch connector clamp from the column shift.
(b) Detach the wire harness clamp and cut the 4 wire guides.
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
(c) Remove the 3 bolts.
(d) Separate the shift lever plate from the column shift control shift
lever retainer.
4. REMOVE COLUMN SHIFT SHIFT LOCK RELEASE LINK
(a) Remove the shift lock release link and spring from the shift lever
plate.
5. REMOVE COLUMN SHIFT SHIFT LEVER SUB-ASSEMBLY
(a) Remove the shift lever and 2 lever selecting bushes from the column shift control shift lever retainer.
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
(b) Using a thin-bladed screwdriver, release the connector housing
retainer.
(c) w/o Trailer Towing System:
(d) w/ Trailer Towing System:
(e) Detach the 2 claws and remove the control shaft tube clamp
from the column shift control shift lever retainer.
6. REMOVE SHIFT LOCK SOLENOID
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
(a) Detach the 2 claws and remove the shift lock solenoid bracket.
(b) Remove the screw, collar, 2 bushes and shift lock solenoid with
No. 1 shift lock plate sub-assembly from the column shift control
shift lever retainer.
(c) Insert a thin-bladed screwdriver, release the locking lug of
terminal 1 (SLS+) and 8 (E), and pull the terminals out from the
rear.
7. DISCONNECT NO. 1 SHIFT LOCK PLATE SUB-ASSEMBLY
(a) Using a pin-punch and hammer, tap out the spring pin and
disconnect the shift lock plate from the shift lock solenoid.
8. REMOVE TRANSMISSION CONTROL SWITCH (S POSITION)
AB60E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст