Toyota Tundra (2015 year). Manual — part 765
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002YBG03UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY (for Floor Shift Type): DISASSEMBLY; 2015
MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE SHIFT LEVER CAP
(a) Using a screwdriver, detach the 2 claws and remove the shift
lever cap from the upper position indicator housing.
Text in Illustration
*a
Protective Tape
NOTICE:
Be careful not to damage the shift lever cap.
HINT:
Tape the screwdriver tip before use.
2. REMOVE UPPER POSITION INDICATOR HOUSING
(a) Detach the 4 claws and remove the upper position indicator
housing from the shift lever assembly.
3. REMOVE POSITION INDICATOR SLIDE COVER
AB60F AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
(a) Remove the position indicator slide cover together with the No.
2 position indicator slide cover from the shift lever assembly.
4. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER
(a) Remove the No. 2 position indicator slide cover from the
position indicator slide cover.
5. DISCONNECT INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Using a thin-bladed screwdriver, release the connector housing
retainer.
Text in Illustration
*1
Connector Housing Retainer
*a
Component without harness connected
(Transmission Control Switch)
(b) Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the
illustration.
AB60F AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
(c) Detach the 4 guides from the shift lever assembly.
6. REMOVE LOWER POSITION INDICATOR HOUSING
(a) Using a small screwdriver, detach the 4 claws and remove the
lower position indicator housing from the shift lever assembly.
Text in Illustration
*a
Protective Tape
NOTICE:
Be careful not to damage the lower position indicator housing
and shift lever assembly.
HINT:
Tape the screwdriver tip before use.
7. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Disconnect the connector and remove the indicator light wire
sub-assembly from the lower position indicator housing.
8. REMOVE POSITION INDICATOR LED
AB60F AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
(a) Detach the claw and remove the position indicator LED from the
lower position indicator housing.
9. REMOVE SHIFT LOCK CONTROL ECU
(a) Disconnect the shift lock solenoid connector.
(b) Detach the 3 claws and remove the shift lock control ECU from the shift lever assembly.
AB60F AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст