Toyota Tundra (2015 year). Manual — part 1707
12. INSPECT CRANKSHAFT BEARING CAP SET BOLT
(a) Using a vernier caliper, measure the minimum diameter of
the elongated thread at the measuring point.
Standard diameter:
ITEM
SPECIFIED CONDITION
Bolt A
10.5 to 11.0 mm (0.413 to 0.433 in.)
Bolt B
9.5 to 10.0 mm (0.374 to 0.394 in.)
Minimum diameter:
ITEM
SPECIFIED CONDITION
Bolt A
10.4 mm (0.409 in.)
Bolt B
9.4 mm (0.370 in.)
If the diameter is less than the minimum, replace the bolt.
13. INSPECT NO. 1 OIL NOZZLE SUB-ASSEMBLY
(a) Push the check valve with a pin to check if it is stuck. If
stuck, replace the oil nozzle.
(b) Push the check valve with a pin to check if it moves smoothly.
If it does not move smoothly, clean or replace the oil nozzle.
(c) While covering A, apply air into B. Check that air does not
leak through C. Perform the check again while covering B and
applying air into A.
If air leaks, clean or replace the oil nozzle.
(d) Push the check valve while covering A, and apply air into B.
Check that air passes through C. Perform the check again
while covering B, pushing the check valve and applying air
into A.
If air does not pass through C, clean or replace the oil nozzle.
3UR-FBE ENGINE MECHANICAL: CYLINDER BLOCK: INSPECT...
3UR-FBE ENGINE MECHANICAL: CYLINDER BLOCK: INSPECT...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002S5G03CX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE ENGINE MECHANICAL: CYLINDER BLOCK: REPLACEMENT; 2015 MY Tundra [08/2014 - ]
REPLACEMENT
1. REPLACE STRAIGHT PIN
NOTICE:
It is not necessary to remove the straight pin unless it is being replaced.
(a) Remove the straight pins.
(b) Using a plastic-faced hammer, tap in new straight pins to the cylinder block.
Standard protrusion:
ITEM
PIN DIAMETER
SPECIFIED CONDITION
Pin A
10 mm (0.394 in.)
23 mm (0.906 in.)
3UR-FBE ENGINE MECHANICAL: CYLINDER BLOCK: REPLAC...
ITEM
PIN DIAMETER
SPECIFIED CONDITION
Pin B
10 mm (0.394 in.)
11 mm (0.433 in.)
Pin C
8 mm (0.315 in.)
9 mm (0.354 in.)
Pin D
4 mm (0.157 in.)
6 mm (0.236 in.)
3UR-FBE ENGINE MECHANICAL: CYLINDER BLOCK: REPLAC...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст