Toyota Tundra (2015 year). Manual — part 150
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000004S2N01QX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: Power Source Circuit; 2015 MY Tundra
[08/2014 - ]
Power Source Circuit
DESCRIPTION
This circuit provides power to operate the blind spot monitor sensor.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
1.
CHECK HARNESS AND CONNECTOR (BLIND SPOT MONITOR SENSOR LH, BLIND SPOT
MONITOR SENSOR RH - BATTERY AND BODY GROUND)
(a) Disconnect the blind spot monitor sensor RH connector.
(b) Disconnect the blind spot monitor sensor LH connector.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
S6-5 (BRB) - Body ground
Ignition switch ON
11 to 14 V
S6-5 (BRB) - Body ground
Ignition switch off
Below 1 V
S5-5 (BLB) - Body ground
Ignition switch ON
11 to 14 V
S5-5 (BLB) - Body ground
Ignition switch off
Below 1 V
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
S6-10 (BRGD) - Body ground
Always
Below 1 Ω
S5-10 (BLGD) - Body ground
Always
Below 1 Ω
Text in Illustration
*a
*b
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN
PROBLEM SYMPTOMS TABLE
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM00000316R009X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARK ASSIST / MONITORING: CLEARANCE SONAR MAIN SWITCH: COMPONENTS; 2015 MY Tundra
[08/2014 - ]
COMPONENTS
ILLUSTRATION
PARK ASSIST / MONITORING: CLEARANCE SONAR MAIN SWI...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст