Toyota Tundra (2015 year). Manual — part 627
MARK
THICKNESS
Z
4.325 to 4.374 mm (0.17028 to 0.17220 in.)
6. INSTALL BRAKE PLATE STOPPER SPRING
7. INSTALL REAR PLANETARY RING GEAR
(a) Install the rear planetary ring gear flange on the rear planetary ring gear.
(b) Using a screwdriver, install the snap ring.
(c) Install the 3 thrust bearing races, thrust needle roller bearing
and planetary ring gear with the rear planetary ring gear flange
to the intermediate shaft.
HINT:
Bearing and race diameter:
ITEM
INSIDE
OUTSIDE
Front race
H
39.5 to 39.8 mm (1.56 to
1.57 in.)
56.9 to 57.2 mm (2.24 to
2.25 in.)
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
ITEM
INSIDE
OUTSIDE
Bearing H
36.5 to 36.6 mm (1.437 to
1.441 in.)
56.8 to 57.1 mm (2.24 to
2.25 in.)
Rear race
H
36.5 to 36.7 mm (1.437 to
1.445 in.)
56.7 to 57.2 mm (2.23 to
2.25 in.)
Race I
21.1 to 21.3 mm (0.831 to
0.839 in.)
39.9 to 40.1 mm (1.57 to
1.58 in.)
8. INSTALL INTERMEDIATE SHAFT WITH REAR
PLANETARY RING GEAR FLANGE AND REAR PLANETARY
RING GEAR
(a) Install the intermediate shaft with rear planetary ring gear
flange and rear planetary ring gear to the transmission case.
9. INSTALL NO. 4 BRAKE DISC
(a) Install the flange, 7 discs, 6 plates and selected flange.
Install in order:
F - D - P - D - P - D - P - D - P - D - P - D - P - D - S/F
HINT:
F = Flange
D = Disc
P = Plate
S/F = Selected flange
NOTICE:
Before assembling new discs, soak them in ATF for at least 2
hours.
10. INSTALL NO. 3 1-WAY CLUTCH INNER RACE
(a) Install the 1-way clutch inner race to the No. 3 1-way clutch
assembly.
NOTICE:
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
12. INSTALL NO. 3 1-WAY CLUTCH ASSEMBLY
(a) Install the 1-way clutch assembly to the transmission case.
(b) Using SST, install the snap ring.
SST: 09350-30020
09350-07060
13. INSTALL NO. 2 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them to the brake
piston.
(b) Press the brake piston into the brake cylinder with both hands.
NOTICE:
Be careful not to damage the O-rings.
14. INSTALL NO. 2 BRAKE CYLINDER WITH NO. 2 BRAKE PISTON
(a) Install the No. 2 brake cylinder with piston to the transmission case.
NOTICE:
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
When installing the No. 2 brake cylinder with piston to the transmission case, align and install the
cylinder's claw to the case's top groove.
Make sure the No. 2 brake cylinder with piston is securely inserted into the transmission case.
15. SELECT NO. 2 BRAKE FLANGE
(a) Install the No. 2 brake piston return spring and flange on the No. 2 brake piston.
(b) Place SST on the brake flange and compress the brake return spring.
SST: 09380-60010
09381-06010
09381-06020
09381-06050
09381-06070
09381-06090
09381-06120
(c) Using a screwdriver, install the snap ring to the transmission case.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст