Toyota Tundra (2015 year). Manual — part 68
RESULT
MEANING
ACTION
DETAIL The device responds with a DTC.
Look up the DTC in
"Unit Check Mode".
NCON
The device was previously present,
but does not respond in diagnostic
mode.
- Check power supply
- Check the AVC-LAN
The device responds in diagnostic
mode, but gives no DTC
information.
- Check power supply
- Check the AVC-LAN
NAME
COMPONENT
CONNECTION
METHOD
AUX/USB
No. 1 stereo jack adapter
assembly
Vehicle wire harness
(b) Unit check mode screen description
Screen Description
DISPLAY
CONTENT
*a: Device
name
Target device
*b: History
DTC
Diagnostic memory results and stored DTCs are
displayed.
*c: Current
DTC
DTCs output in the service check are displayed.
*d: DTC
DTC (Diagnostic Trouble Code)
*e:
Timestamp
*f: Diagnosis
clear switch
Pushing this switch for 3 seconds clears the
displayed data are cleared.)
HINT:
(c) Read the system check result.
(1) If the check result is "DETAIL", touch the displayed check
result to view the results on the "Unit Check Mode" screen
and record them.
NOTICE:
HINT:
.
7. DTC CLEAR/RECHECK (CLEAR USING SYSTEM CHECK MODE SCREEN)
(a) Clear DTCs
(1) Press the "Memory CLR" switch for 3 seconds.
(2) Confirm that the check results are cleared.
HINT:
To clear the DTCs for a specific device, clear the DTCs using the
"Unit Check Mode" screen.
When clearing the DTCs using the "Unit Check Mode" screen,
press the "Code CLR" switch for 3 seconds.
(b) Recheck
(1) Press the "Recheck" switch.
NAVIGATION: NAVIGATION SYSTEM: DTC CHECK / CLEAR; 20...
(2) Confirm that all diagnostic codes are "OK" when the check
results are displayed. If a code other than "OK" is displayed,
troubleshoot again.
HINT:
When the DTCs are cleared using the "Unit Check Mode" screen,
press the "Back" switch to return to the "System Check Mode"
screen and perform this operation.
8. FINISH DIAGNOSTIC MODE
(a) Turn the ignition switch off.
NAVIGATION: NAVIGATION SYSTEM: DTC CHECK / CLEAR; 20...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000004Z3F01UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: FREEZE FRAME DATA; 2015 MY Tundra [08/2014 - ]
FREEZE FRAME DATA
1. CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
(e) Select a PTC to display its Freeze Frame Data.
2. LIST OF FREEZE FRAME DATA
(a) Refer to "Data List / Active Test"
.
NAVIGATION: NAVIGATION SYSTEM: FREEZE FRAME DATA; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст