Toyota Tundra (2015 year). Manual — part 1399
1UR-FE IGNITION: IGNITION SYSTEM: PARTS LOCATION; 2015...
Last Modified: 9-16-2014
6.6 U
Doc ID: RM0000030Z5023X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE IGNITION: IGNITION SYSTEM: SYSTEM DIAGRAM; 2015 MY Tundra [08/2014 - ]
SYSTEM DIAGRAM
1UR-FE IGNITION: IGNITION SYSTEM: SYSTEM DIAGRAM; 201...
1UR-FE IGNITION: IGNITION SYSTEM: SYSTEM DIAGRAM; 201...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002N0603WX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE IGNITION: IGNITION SYSTEM: ON-VEHICLE INSPECTION; 2015 MY Tundra [08/2014 - ]
ON-VEHICLE INSPECTION
1. PERFORM SPARK TEST
(a) Check for DTCs
.
NOTICE:
If any DTC is present, perform troubleshooting procedures for that DTC.
(b) Check if sparks occur.
(1) Remove the ignition coils and spark plugs
.
(2) Install the spark plug to the ignition coil and connect the ignition coil connector.
(3) Disconnect the 8 injector connectors.
(4) Ground the spark plug.
(5) Visually check that sparks occur while the engine is being cranked.
NOTICE:
cranking.
If an ignition coil assembly is struck or dropped, replace it with a new one.
If a spark plug is struck or dropped, replace it with a new one.
2. INSPECT IGNITION COIL AND SPARK PLUG
(a) Spark test flowchart.
RESULT
PROCEED TO
NG
Connect securely
OK
Go to next step
(2) Perform a spark test on each ignition coil with igniter.
If there is a cylinder where sparks do not occur, replace its ignition coil with the ignition coil
1.
1UR-FE IGNITION: IGNITION SYSTEM: ON-VEHICLE INSPECTIO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст