Toyota Tundra (2015 year). Manual — part 84
OK
HINT:
Customization may not be possible depending on the malfunction in the front power seat control system
(w/ Memory).
OK:
No malfunctions are present in the front power seat control system (w/ Memory).
NG
GO TO FRONT POWER SEAT CONTROL SYSTEM (w/
Memory)
3.
CHECK CUSTOMIZE ITEMS
(a) Display the "Vehicle Customization" screen.
These items shown as customizable via the navigation receiver assembly vehicle customization screen can
also be changed using the Techstream. In a following step, the Techstream will be used.
(1) Check the customize parameters list for the front power seat control system (w/ Memory) related
items that can be customized via the navigation receiver assembly screen
.
OK:
The items available for customization via the navigation receiver assembly screen can be customized
successfully using the manual procedure.
Result
RESULT
PROCEED TO
OK (for Column Shift Type)
A
OK (for Floor Shift Type)
B
NG
C
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
REPLACE FRONT POWER SEAT SWITCH LH
A
REPLACE NAVIGATION RECEIVER ASSEMBLY
NAVIGATION: NAVIGATION SYSTEM: B15F8; D-Seat ECU Vehicle ...
OK
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000001YYU0FFX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: B15FE,B15FF; XM Tuner Antenna Disconnected; 2015 MY Tundra
[08/2014 - ]
DTC
B15FE
XM Tuner Antenna Disconnected
DTC
B15FF
XM Tuner Antenna Short
DESCRIPTION
These DTCs are stored when a malfunction occurs in the satellite radio antenna which is connected to the
navigation receiver assembly.
DTC CODE
DTC DETECTION CONDITION
TROUBLE AREA
B15FE
Satellite radio antenna is not connected.
Satellite radio antenna assembly
Stereo component tuner assembly
Navigation receiver assembly
B15FF
A short occurs in satellite radio antenna.
INSPECTION PROCEDURE
NOTICE:
PROCEDURE
1.
CHECK CONNECTION OF SATELLITE RADIO ANTENNA CABLE
(a) Check if the satellite radio antenna cable is securely connected to the stereo component tuner
assembly.
OK:
Satellite radio antenna cable is securely connected.
NG
SECURELY CONNECT SATELLITE RADIO ANTENNA
CABLE
2.
CHECK SATELLITE RADIO ANTENNA ASSEMBLY
NAVIGATION: NAVIGATION SYSTEM: B15FE,B15FF; XM Tuner A...
(a) Replace the satellite radio antenna assembly with a known good one
.
(b) Clear the DTCs
.
(c) Check for DTCs
.
OK:
No DTCs are output.
NG
GO TO STEP 3
OK
END (SATELLITE RADIO ANTENNA ASSEMBLY IS
DEFECTIVE)
3.
CHECK STEREO COMPONENT TUNER ASSEMBLY
(a) Replace the stereo component tuner assembly with a known good one.
for Column Shift Type:
for Floor Shift Type:
(b) Clear the DTCs
.
(c) Check for DTCs
.
OK:
No DTCs are output.
Result
RESULT
PROCEED TO
OK
A
NG (for Column Shift Type)
B
NG (for Floor Shift Type)
C
B
REPLACE NAVIGATION RECEIVER ASSEMBLY
C
REPLACE NAVIGATION RECEIVER ASSEMBLY
A
END (STEREO COMPONENT TUNER ASSEMBLY IS
DEFECTIVE)
NAVIGATION: NAVIGATION SYSTEM: B15FE,B15FF; XM Tuner A...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000003WPV0DRX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: NAVIGATION: NAVIGATION SYSTEM: U0073,U0100,U0129,U0140,U0155,U0164; Sending Malfunction
(Navigation to APGS); 2015 MY Tundra [08/2014 - ]
DTC
U0073
Sending Malfunction (Navigation to APGS)
DTC
U0100
Lost Communication with ECM / PCM "A"
DTC
U0129
Lost Communication with Brake System Control Module
DTC
U0140
Lost Communication with Body Control Module
DTC
U0155
Meter ECU Communication
DTC
U0164
Lost Communication with A/C ECU
DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication circuit.
DTC CODE
DTC DETECTION CONDITION
TROUBLE AREA
U0073
CAN bus connection error
CAN communication system
U0100
CAN reception error
U0129
CAN reception error
U0140
CAN reception error
U0155
CAN reception error
U0164
CAN reception error
INSPECTION PROCEDURE
PROCEDURE
1.
CHECK FOR DTC
(a) Clear the DTCs
.
NAVIGATION: NAVIGATION SYSTEM: U0073,U0100,U0129,U0140...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст