Toyota Tundra (2015 year). Manual — part 2923
(a) Remove the 5 bolts and rear bumper bar corner reinforcement
LH.
7. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT RH
HINT:
Use the same procedure described for the LH side.
8. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
9. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
10. REMOVE NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
11. REMOVE NO. 2 FRAME WIRE
(a) w/ Towing Package:
(1) Detach all the clamps and remove the No. 2 frame wire from the receiver hitch bracket sub-assembly.
Text in Illustration
*A
w/ Intuitive Parking Assist System
*B
w/o Intuitive Parking Assist System
(b) w/o Towing Package:
(1) Detach all the clamps and remove the No. 2 frame wire from the rear bumper reinforcement
sub-assembly.
EXTERIOR: REAR BUMPER (for Steel Type Bumper): DISASSEMBL...
Text in Illustration
*A
w/ Intuitive Parking Assist System
*B
w/o Intuitive Parking Assist System
12. REMOVE REAR BUMPER PLATE
(a) Remove the 2 bolts and rear bumper plate.
Text in Illustration
*A
w/ Towing Package
*B
w/o Towing Package
13. REMOVE REAR BUMPER BAR LH
EXTERIOR: REAR BUMPER (for Steel Type Bumper): DISASSEMBL...
(a) Remove the 5 bolts and rear bumper bar LH.
14. REMOVE REAR BUMPER BAR RH
HINT:
Use the same procedure described for the LH side.
15. REMOVE REAR BUMPER UPPER COVER LH
(a) Remove the 2 nuts and rear bumper upper cover LH.
16. REMOVE REAR BUMPER UPPER COVER RH
HINT:
Use the same procedure described for the LH side.
EXTERIOR: REAR BUMPER (for Steel Type Bumper): DISASSEMBL...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002WJU00AX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: EXTERIOR: REAR BUMPER (for Steel Type Bumper): REASSEMBLY; 2015 MY Tundra [08/2014 - ]
REASSEMBLY
1. INSTALL REAR BUMPER UPPER COVER LH
(a) Install the rear bumper upper cover LH with the 2 nuts.
Torque:
30 N·m {306 kgf·cm, 22ft·lbf}
2. INSTALL REAR BUMPER UPPER COVER RH
HINT:
Use the same procedure described for the LH side.
3. INSTALL REAR BUMPER BAR LH
(a) Install the rear bumper bar LH with the 5 bolts.
Torque:
30 N·m {306 kgf·cm, 22ft·lbf}
4. INSTALL REAR BUMPER BAR RH
HINT:
Use the same procedure described for the LH side.
5. INSTALL REAR BUMPER PLATE
(a) Install the rear bumper plate with the 2 bolts.
Torque:
30 N·m {306 kgf·cm, 22ft·lbf}
6. INSTALL NO. 2 FRAME WIRE
(a) w/ Towing Package:
(1) Attach all the clamps to install the No. 2 frame wire to the receiver hitch bracket sub-assembly.
(b) w/o Towing Package:
(1) Attach all the clamps to install the No. 2 frame wire to the rear bumper reinforcement sub-assembly.
7. INSTALL NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
8. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
9. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
10. INSTALL REAR BUMPER BAR CORNER REINFORCEMENT LH
(a) Install the rear bumper bar corner reinforcement LH with the 5 bolts.
Torque:
30 N·m {306 kgf·cm, 22ft·lbf}
11. INSTALL REAR BUMPER BAR CORNER REINFORCEMENT RH
EXTERIOR: REAR BUMPER (for Steel Type Bumper): REASSEMBLY...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст