Toyota Tundra (2015 year). Manual — part 784
Last Modified: 9-16-2014
6.6 K
Doc ID: RM00000270Z013X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AXLE: REAR AXLE SHAFT: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
AXLE: REAR AXLE SHAFT: COMPONENTS; 2015 MY Tundra [08/...
ILLUSTRATION
ILLUSTRATION
AXLE: REAR AXLE SHAFT: COMPONENTS; 2015 MY Tundra [08/...
AXLE: REAR AXLE SHAFT: COMPONENTS; 2015 MY Tundra [08/...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM00000270F01CX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AXLE: REAR AXLE SHAFT: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
HINT:
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL LH
2. DRAIN BRAKE FLUID
3. DISCONNECT REAR BRAKE FLEXIBLE HOSE
(a) Disconnect the brake tube from the flexible hose with union nut
wrench while holding the flexible hose with a wrench.
NOTICE:
Do not bend or damage the brake tube.
Do not allow any foreign matter such as dirt and dust to enter
the brake tube from the connecting point.
(b) Remove the clip.
4. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
(a) Remove the 2 bolts and disconnect rear disc brake cylinder.
NOTICE:
Do not twist or bend the flexible hose.
Do not disconnect the flexible hose from the disc brake cylinder.
5. REMOVE REAR DISC LH
6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING LH
7. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
8. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH
9. REMOVE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY LH
AXLE: REAR AXLE SHAFT: REMOVAL; 2015 MY Tundra [08/2014 - ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст