Toyota Tundra (2015 year). Manual — part 240
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000001K2301OX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C1201/51; Engine Control System
Malfunction; 2015 MY Tundra [08/2014 - ]
DTC
C1201/51 Engine Control System Malfunction
DESCRIPTION
DTC CODE
DTC DETECTION CONDITION
TROUBLE AREA
C1201/51
Engine control system malfunction signal continues for 1.2 seconds.
SFI system
INSPECTION PROCEDURE
NOTICE:
When replacing the VSC actuator assembly, perform zero point calibration
.
PROCEDURE
1.
CHECK DTC (FOR SFI SYSTEM)
(a) for 1UR-FE:
Clear the DTC (SFI system)
.
for 3UR-FE:
Clear the DTC (SFI system)
.
for 3UR-FBE:
Clear the DTC (SFI system)
.
(b) for 1UR-FE:
Check the DTC (SFI system)
.
for 3UR-FE:
Check the DTC (SFI system)
.
for 3UR-FBE:
Check the DTC (SFI system)
.
Result
RESULT
PROCEED TO
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C...
RESULT
PROCEED TO
DTC (SFI system) is not output
A
DTC (SFI system) is output (for 1UR-FE)
B
DTC (SFI system) is output (for 3UR-FE)
C
DTC (SFI system) is output (for 3UR-FBE)
D
B
GO TO SFI SYSTEM
C
GO TO SFI SYSTEM
D
GO TO SFI SYSTEM
A
USE SIMULATION METHOD TO CHECK
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C...
NEXT
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000001K2401GX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C1203/53; ECM Communication Circuit
Malfunction; 2015 MY Tundra [08/2014 - ]
DTC
C1203/53 ECM Communication Circuit Malfunction
DESCRIPTION
A new skid control ECU is supplied without engine variation data. Until it is recognized by the ECU, DTC C1203/53
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
C1203/53
skid control ECU non-volatile memory.
1.
DTC U0073/94 not detected.
2.
DTC U0100/65 not detected.
3.
Test mode not
performed
Skid control ECU
INSPECTION PROCEDURE
NOTICE:
When replacing the VSC actuator assembly, perform zero point calibration
.
PROCEDURE
1.
PERFORM TEST MODE INSPECTION
(a) Perform a TEST MODE inspection
.
2.
RECONFIRM DTC
(a) Clear the DTC
.
(b) Start the engine.
(c) Check if the same DTC is output
.
Result
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C...
RESULT
PROCEED TO
DTC is output
A
DTC is not output
B
B
USE SIMULATION METHOD TO CHECK
A
REPLACE VSC ACTUATOR ASSEMBLY
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст