Toyota Tundra (2015 year). Manual — part 499
(a) Coat 2 new O-rings with ATF, and install one to each speed
sensor.
(b) Install the 2 speed sensors.
(c) Install the 2 bolts.
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
74. INSTALL OIL COOLER TUBE UNION
(a) Coat 2 new O-rings with ATF, and install them to the 2 oil cooler
tube unions.
(b) Install the 2 oil cooler tube unions.
Torque:
29 N·m {300 kgf·cm, 22ft·lbf}
75. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Install the park/neutral position switch to the manual valve lever shaft, and temporarily install the
adjusting bolt.
(b) Install a new lock washer and the nut.
Torque:
6.9 N·m {70 kgf·cm, 61in·lbf}
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
(c) Turn the control shaft lever counterclockwise until it stops, and
then turn it clockwise 2 notches to set it to the N position.
(d) Align the neutral basic line with the switch groove as shown in
the illustration, and tighten the adjusting bolt.
Torque:
13 N·m {130 kgf·cm, 9ft·lbf}
(a) Install the control shaft lever RH with the washer and nut.
Torque:
16 N·m {163 kgf·cm, 12ft·lbf}
A760F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISS...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000001BZC035X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760F AUTOMATIC TRANSMISSION: OIL COOLER: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
A760F AUTOMATIC TRANSMISSION: OIL COOLER: COMPONEN...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000001BZD046X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760F AUTOMATIC TRANSMISSION: OIL COOLER: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE FRONT EXHAUST PIPE ASSEMBLY
3. DISCONNECT WATER BY-PASS PIPE ASSEMBLY
(a) Remove the bolt and disconnect the 2 water by-pass hoses from
the transmission oil cooler to disconnect the water by-pass pipe.
HINT:
4. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System)
(a) Disconnect the 2 No. 1 transmission oil cooler hoses from the transmission.
(b) Remove the 3 bolts and transmission oil cooler with transmission oil cooler spacer.
(c) Remove the 2 No. 1 transmission oil cooler hoses from the transmission oil cooler spacer.
(d) Remove the 3 bolts and transmission oil cooler from the
transmission oil cooler spacer.
A760F AUTOMATIC TRANSMISSION: OIL COOLER: REMOVAL; ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст