Toyota Tundra (2015 year). Manual — part 2594
Last Modified: 9-16-2014
6.6 G
Doc ID: RM0000028S502ZX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE FUEL: FUEL PUMP: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT FUEL PUMP
table below.
Standard resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
0.2 to 3.0 Ω
If the result is not as specified, replace the fuel suction
with pump and gauge tube assembly.
the connector, and the negative (-) lead to terminal 2.
Check that the fuel pump operates.
NOTICE:
These tests must be performed within 10 seconds to prevent
the coil from burning out.
Keep the fuel pump as far away from the battery as possible.
Always turn the voltage on and off on the battery side, not
the fuel pump side.
3UR-FE FUEL: FUEL PUMP: INSPECTION; 2015 MY Tundra [08/201...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000000YLI063X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE FUEL: FUEL PUMP: REASSEMBLY; 2015 MY Tundra [08/2014 - ]
REASSEMBLY
HINT:
Perform "Inspection After Repairs" after replacing the fuel pump
.
1. INSTALL FUEL PUMP
HINT:
Perform "Inspection After Repairs" after replacing the fuel pump
.
(a) Install the fuel pump harness.
(c) Attach the 5 claws to the claw holes and install the fuel pump
and suction plate with filter.
2. INSTALL SUB TANK SUB-ASSEMBLY
3UR-FE FUEL: FUEL PUMP: REASSEMBLY; 2015 MY Tundra [08/2...
(a) Attach the 2 claws to the claw holes and install the fuel sub
tank.
(b) Attach the 3 claws to the claw holes.
(c) Connect the fuel tube.
(d) Install the tube part to the sub tank.
(e) Connect the fuel pump connector.
3. INSTALL FUEL SENDER GAUGE
3UR-FE FUEL: FUEL PUMP: REASSEMBLY; 2015 MY Tundra [08/2...
(a) Set the sender gauge to the sub tank. Then slide the sender
gauge downward to install it.
(b) Connect the fuel sender gauge connector.
3UR-FE FUEL: FUEL PUMP: REASSEMBLY; 2015 MY Tundra [08/2...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст