Toyota Tundra (2015 year). Manual — part 2038
OK
Standard Current:
TESTER OPERATION
AIR PUMP
ASV
SPECIFIED CONDITION
AIR PUMP: ON, ASV: OPEN
ON
OPEN
10 to 40 A
AIR PUMP: OFF, ASV: CLOSE
OFF
CLOSE
Below 1 A
NOTICE:
the prohibition (WAIT or ERROR).
If ERROR is displayed on the Techstream during the test, stop the engine for 10 minutes, and then
try again.
GO TO STEP 17
15.
PERFORM ACTIVE TEST USING TECHSTREAM
(a) Disconnect the AID connectors.
3UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P2444-P2447;...
(d) Turn the ignition switch to ON.
(e) Turn the Techstream on.
(f) Enter the following menus: Powertrain / Engine and ECT / Utility / Air Injection Check / Manual
Mode / AIR PUMP 1: ON, ASV 1: OPEN or AIR PUMP 2: ON, ASV 2: OPEN.
HINT:
When Manual Mode is selected, the Techstream initialization (atmospheric pressure measurement) is
performed automatically. The initialization takes 10 seconds. After the initialization, AIR PUMP and ASV
operation can be selected.
(g) Start the engine.
(h) Perform the AIR system forced operation while the engine is idling.
(j) Turn the ignition switch off.
NOTICE:
3UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P2444-P2447;...
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
D50-3 (SIV) - D50-1 (E)
AIR PUMP: ON, ASV: OPEN
0.5 to 2 V
D54-3 (SIV2) - D54-1 (E2)
AIR PUMP: ON, ASV: OPEN
0.5 to 2 V
D50-3 (SIV) - D50-1 (E)
AIR PUMP: OFF, ASV: CLOSE
11 to 14 V
D54-3 (SIV2) - D54-1 (E2)
AIR PUMP: OFF, ASV: CLOSE
11 to 14 V
(l) Connect the Techstream to the DLC3.
(m) Turn the ignition switch to ON.
(n) Turn the Techstream on.
(o) Enter the following menus: Powertrain / Engine and ECT / Utility / Air Injection Check /
Manual Mode / AIR PUMP 1: ON, ASV 1: OPEN or AIR PUMP 2: ON, ASV 2: OPEN.
3UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P2444-P2447;...
OK
NEXT
HINT:
When Manual Mode is selected, the Techstream initialization (atmospheric pressure measurement) is
performed automatically. The initialization takes 10 seconds. After the initialization, AIR PUMP and ASV
operation can be selected.
(p) Start the engine.
(q) Perform the AIR system forced operation while the engine is idling.
(s) Turn the ignition switch off.
NOTICE:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
D50-4 (SIP) - D50-1 (E)
AIR PUMP: ON, ASV: OPEN
0.5 to 2 V
D54-4 (SIP2) - D54-1 (E2)
AIR PUMP: ON, ASV: OPEN
0.5 to 2 V
D50-4 (SIP) - D50-1 (E)
AIR PUMP: OFF, ASV: CLOSE
11 to 14 V
D54-4 (SIP2) - D54-1 (E2)
AIR PUMP: OFF, ASV: CLOSE
11 to 14 V
NG
REPLACE ECM
16.
REPLACE AIR INJECTION CONTROL DRIVER
(a) Replace the air injection control driver
.
NEXT
GO TO STEP 18
17.
REPLACE AIR PUMP ASSEMBLY
Replace air pump assembly
.
3UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P2444-P2447;...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст