Toyota Tundra (2015 year). Manual — part 2700
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
A24-28 (IGSW) - Body
ground
Ignition switch ON
11 to 14 V
Result
RESULT
PROCEED TO
OK (for 1UR-FE)
A
OK (for 3UR-FE)
B
OK (for 3UR-FBE)
C
NG
D
B
REPLACE ECM
C
REPLACE ECM
D
REPAIR OR REPLACE HARNESS OR CONNECTOR
A
REPLACE ECM
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: ECM ...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000002VTH00VX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Combination Meter ECU Communication Stop
Mode; 2015 MY Tundra [08/2014 - ]
Combination Meter ECU Communication Stop Mode
DESCRIPTION
DETECTION ITEM
SYMPTOM
TROUBLE AREA
Combination Meter ECU
Communication Stop
Mode
Either condition is met:
"Combination Meter" is not displayed
on the "Bus Check" screen.
"Combination Meter ECU
Communication Stop Mode" in "DTC
Combination Table" applies.
Power source or inside
combination meter
assembly
Combination meter
assembly
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1.
CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - BATTERY
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Combin...
AND BODY GROUND)
(a) Disconnect the J28 combination meter assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
J28-24 (ES) - Body ground
Always
Below 1 Ω
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
J28-1 (B) - Body ground
Always
11 to 14 V
J28-2 (IG+) - Body ground
Ignition switch ON
11 to 14 V
Text in Illustration
*a
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE COMBINATION METER ASSEMBLY
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Combin...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000002VTK00RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Main Body ECU Communication Stop Mode; 2015
MY Tundra [08/2014 - ]
Main Body ECU Communication Stop Mode
DESCRIPTION
DETECTION ITEM
SYMPTOM
TROUBLE AREA
Main Body ECU
Communication Stop
Mode
Either condition is met:
"Main Body" is not displayed on
the "Bus Check" screen.
"Main Body ECU Communication
Stop Mode" in "DTC Combination
Table" applies.
block assembly)
Main body ECU (driver side
junction block assembly) CAN
branch wire or connector
Main body ECU (driver side
junction block assembly)
WIRING DIAGRAM
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Main ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст