Toyota Tundra (2015 year). Manual — part 1312
NEXT
17.
CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
(a) Check the fuel pump operation.
OK:
Malfunction has been repaired successfully.
NG
REPLACE ECM
OK
END
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: Fuel Pump Co...
Last Modified: 9-16-2014
6.6 J
Doc ID: RM000003302057X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: Fuel Injector Circuit; 2015 MY Tundra [08/2014 - ]
Fuel Injector Circuit
DESCRIPTION
The fuel injectors are located on the intake manifold. They inject fuel into the cylinders based on the signals from
the ECM.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: Fuel Injector C...
OK
1.
INSPECT FUEL INJECTOR ASSEMBLY (POWER SOURCE)
(a) Disconnect the fuel injector assembly connector.
(b) Turn the ignition switch to ON.
(c) Measure the voltage according to the value(s) in the table
below.
Standard Voltage:
CYLINDER
TESTER
CONNECTION
SWITCH
CONDITION
SPECIFIED
CONDITION
No. 1
H1-2 - Ground
Ignition switch
ON
11 to 14 V
No. 2
F1-2 - Ground
Ignition switch
ON
11 to 14 V
No. 3
H2-2 - Ground
Ignition switch
ON
11 to 14 V
No. 4
F2-2 - Ground
Ignition switch
ON
11 to 14 V
No. 5
H3-2 - Ground
Ignition switch
ON
11 to 14 V
No. 6
F3-2 - Ground
Ignition switch
ON
11 to 14 V
No. 7
H4-2 - Ground
Ignition switch
ON
11 to 14 V
No. 8
F4-2 - Ground
Ignition switch
ON
11 to 14 V
NG
GO TO STEP 4
2.
INSPECT FUEL INJECTOR ASSEMBLY
(a) Inspect the fuel injector assembly
.
HINT:
Perform "Inspection After Repair" after replacing the fuel injector assembly
.
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: Fuel Injector C...
OK
NG
REPLACE FUEL INJECTOR ASSEMBLY
3.
CHECK HARNESS AND CONNECTOR (FUEL INJECTOR ASSEMBLY - ECM)
(a) Disconnect the fuel injector assembly connector.
(b) Disconnect the ECM connector.
(c) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
CYLINDER
TESTER
CONNECTION
CONDITION
SPECIFIED
CONDITION
No. 1
H1-1 - Ground
Always
10 kΩ or higher
H1-1 - D74-86 (#10)
Always
Below 1 Ω
No. 2
F1-1 - Ground
Always
10 kΩ or higher
F1-1 - D74-109
(#20)
Always
Below 1 Ω
No. 3
H2-1 - Ground
Always
10 kΩ or higher
H2-1 - D74-85 (#30)
Always
Below 1 Ω
No. 4
F2-1 - Ground
Always
10 kΩ or higher
F2-1 - D74-108
(#40)
Always
Below 1 Ω
No. 5
H3-1 - Ground
Always
10 kΩ or higher
H3-1 - D74-84 (#50)
Always
Below 1 Ω
No. 6
F3-1 - Ground
Always
10 kΩ or higher
F3-1 - D74-107
(#60)
Always
Below 1 Ω
No. 7
H4-1 - Ground
Always
10 kΩ or higher
H4-1 - D74-83 (#70)
Always
Below 1 Ω
No. 8
F4-1 - Ground
Always
10 kΩ or higher
F4-1 - D74-106
(#80)
Always
Below 1 Ω
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: Fuel Injector C...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст