Toyota Tundra (2015 year). Manual — part 2551
Last Modified: 9-16-2014
6.6 L
Doc ID: RM000005QCO000X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: PRECAUTION; 2015 MY Tundra [08/2014 - ]
PRECAUTION
HINT:
Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should
be used as a reference only.
When both standard and maximum or minimum values are listed for an inspection, use the standard
value as a reference only and base any judgments on the maximum and minimum values.
3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: PRECAUTIO...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002OP703BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: COMPONEN...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002OP803DX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE INTAKE VALVE
(a) Using SST and wooden blocks, compress the compression
spring and remove the valve retainer locks.
SST: 09202-70020
09202-00010
(b) Remove the retainer, compression spring and valve.
HINT:
Arrange the removed parts in the correct order.
2. REMOVE EXHAUST VALVE
(a) Using SST and wooden blocks, compress the compression
spring and remove the valve retainer locks.
SST: 09202-70020
09202-00010
(b) Remove the retainer, compression spring and valve.
HINT:
Arrange the removed parts in the correct order.
3. REMOVE VALVE STEM OIL SEAL
(a) Using needle-nose pliers, remove the oil seals.
4. REMOVE VALVE SPRING SEAT
3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: DISASSEMBL...
(a) Using compressed air and a magnetic finger, remove the
valve spring seat by blowing air onto it.
5. REMOVE NO. 1 STRAIGHT SCREW PLUG
NOTICE:
If water leaks from the No. 1 screw plug or the plug is corroded, replace it.
(a) Using a 10 mm hexagon wrench, remove the 6 screw plugs
and 6 gaskets.
6. REMOVE NO. 2 STRAIGHT SCREW PLUG
(a) Using a 14 mm hexagon wrench, remove the 2 screw plugs
and 2 gaskets.
NOTICE:
If water leaks from the No. 2 screw plug or the plug is
corroded, replace it.
3UR-FE ENGINE MECHANICAL: CYLINDER HEAD: DISASSEMBL...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст