Toyota Tundra (2015 year). Manual — part 2259
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000002VXJ00YX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): B1443/43; Air
Outlet Damper Control Servo Motor Circuit; 2015 MY Tundra [08/2014 - ]
DTC
B1443/43 Air Outlet Damper Control Servo Motor Circuit
DESCRIPTION
The No. 1 damper servo sub-assembly (air outlet servo motor) sends pulse signals to inform the air conditioning
HINT:
Confirm that no mechanical problem is present because this diagnostic trouble code can be output when
either a damper link or damper is mechanically locked.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
B1443/43
Air outlet damper position sensor value does not change
even if air conditioning amplifier operates No. 1 damper
servo sub-assembly (air outlet servo motor)
No. 1 damper servo
sub-assembly (air outlet
servo motor)
Air conditioning harness
Air conditioning amplifier
WIRING DIAGRAM
INSPECTION PROCEDURE
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
A
PROCEDURE
1.
READ VALUE USING TECHSTREAM (AIR OUTLET SERVO MOTOR TARGET PULSE)
(a) Use the Data List to check if the servo motor is functioning properly.
Air Conditioner
TESTER DISPLAY
MEASUREMENT ITEM / RANGE
NORMAL
CONDITION
DIAGNOSTIC
NOTE
Air Outlet Servo
Pulse (D)
No. 1 damper servo sub-assembly (air outlet servo
motor) target pulse /
Min.: 0, Max.: 255
FACE: 9 (pulse)
B/L: 32 (pulse)
FOOT: 56 (pulse)
FOOT/DEF: 83
(pulse)
DEF: 97 (pulse)
-
OK:
The display is as specified in the normal condition.
Result
RESULT
PROCEED TO
OK (Checking from the DTC)
A
OK (Checking from the PROBLEM SYMPTOMS TABLE)
B
NG
C
B
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN
PROBLEM SYMPTOMS TABLE
C
REPLACE AIR CONDITIONING AMPLIFIER
2.
REPLACE NO. 1 DAMPER SERVO SUB-ASSEMBLY (AIR OUTLET SERVO MOTOR)
(a) Temporarily replace the No. 1 damper servo sub-assembly (air outlet servo motor) with a new one
.
HINT:
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor
with a new one and check that the condition returns to normal.
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
NEXT
NEXT
3.
CHECK FOR DTC
(a) Clear the DTC
.
(b) Check for DTC
.
OK:
DTC is not output.
NG
GO TO STEP 4
OK
END (AIR OUTLET SERVO MOTOR IS DEFECTIVE)
4.
REPLACE AIR CONDITIONING HARNESS
(a) Replace the air conditioning harness.
5.
CHECK FOR DTC
(a) Clear the DTC
.
(b) Check for DTC again
.
OK:
DTC is not output.
NG
REPLACE AIR CONDITIONING AMPLIFIER
OK
END (AIR CONDITIONING HARNESS IS
DEFECTIVE)
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000002ZTE00MX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): B1445/45;
Passenger Side Cool Air Bypass Damper Control; 2015 MY Tundra [08/2014 - ]
DTC
B1445/45 Passenger Side Cool Air Bypass Damper Control
DESCRIPTION
HINT:
Although the tester title says "Passenger Side", there is only one cool air bypass servo motor on this
vehicle.
HINT:
Confirm that no mechanical problem is present because this diagnostic trouble code can be output when
either a damper link or damper is mechanically locked.
DTC
CODE
DTC DETECTION CONDITION
TROUBLE AREA
B1445/45
Cool air bypass servo motor position sensor value does not change
even if air conditioning amplifier operates cool air bypass servo motor
Cool air bypass
servo motor
Air conditioning
harness
Air conditioning
amplifier
WIRING DIAGRAM
AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic A...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст