Toyota Tundra (2015 year). Manual — part 2313
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZFO00VX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: DOOR LOCK: DOOR CONTROL SWITCH (for Front LH): REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE FRONT ARMREST UPPER BASE PANEL LH
(a) Using a moulding remover A, detach the 2 clips and 5 claws, and
remove the front armrest upper base panel LH.
Text in Illustration
*A
for Regular Cab
*B
for Double Cab, for CrewMax
(b) Disconnect the connector.
Text in Illustration
*A
for Regular Cab
*B
for Double Cab, for CrewMax
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL
SWITCH ASSEMBLY)
DOOR LOCK: DOOR CONTROL SWITCH (for Front LH): REMOVAL;...
(a) Remove the 3 screws and power window regulator master switch
assembly (door control switch assembly).
Text in Illustration
*A
for Regular Cab
*B
for Double Cab, for CrewMax
DOOR LOCK: DOOR CONTROL SWITCH (for Front LH): REMOVAL;...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002ZRB00TX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: DOOR LOCK: DOOR CONTROL SWITCH (for Front LH): INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL
SWITCH ASSEMBLY) (for Regular Cab)
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION SWITCH CONDITION SPECIFIED CONDITION
1 (L) - 7 (E)
Lock
Below 1 Ω
1 (L) - 7 (E)
OFF
10 kΩ or higher
9 (UL) - 7 (E)
9 (UL) - 7 (E)
Unlock
Below 1 Ω
If the result is not as specified, replace the power window
regulator master switch assembly (door control switch
assembly).
Text in Illustration
*a
Component without harness connected
(Power Window Regulator Master Switch Assembly (Door Control
Switch Assembly))
*b Unlock
*c Lock
2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL
SWITCH ASSEMBLY) (for Double Cab, for Crew Max)
DOOR LOCK: DOOR CONTROL SWITCH (for Front LH): INSPECTIO...
(a) Measure the resistance according to the value(s) in the table
below.
Standard resistance:
TESTER CONNECTION SWITCH CONDITION SPECIFIED CONDITION
2 (L) - 1 (E)
Lock
Below 1 Ω
2 (L) - 1 (E)
OFF
10 kΩ or higher
9 (UL) - 1 (E)
9 (UL) - 1 (E)
Unlock
Below 1 Ω
If the result is not as specified, replace the power window
regulator master switch assembly (door control switch
assembly).
Text in Illustration
*a
Component without harness connected
(Power Window Regulator Master Switch Assembly (Door Control
Switch Assembly))
*b Unlock
*c Lock
DOOR LOCK: DOOR CONTROL SWITCH (for Front LH): INSPECTIO...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст