Toyota Tundra (2015 year). Manual — part 2559
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002BOH02EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: DRIVE BELT: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
3UR-FE ENGINE MECHANICAL: DRIVE BELT: COMPONENTS; 20...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002WF6027X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: DRIVE BELT: ON-VEHICLE INSPECTION; 2015 MY Tundra [08/2014 -
]
ON-VEHICLE INSPECTION
1. INSPECT FAN & GENERATOR V BELT
generator V belt.
The belt is cracked.
The belt is worn out to the extent that the cords are
exposed.
The belt has chunks missing from the ribs.
(b) Check that the belt fits properly in the ribbed grooves.
HINT:
2. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY
(a) Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise.
If the result is not as specified, replace the tensioner.
3UR-FE ENGINE MECHANICAL: DRIVE BELT: ON-VEHICLE INS...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002BOI02IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE NO. 1 ENGINE UNDER COVER
3. REMOVE FAN & GENERATOR V BELT
(a) While turning the belt tensioner counterclockwise, align the
service hole for the belt tensioner and the belt tensioner
HINT:
The pulley bolt for the belt tensioner has a left-hand thread.
(b) Remove the V belt.
3UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL; 2015 ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002BOF02IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL FAN & GENERATOR V BELT
(a) Set the V belt onto every part.
(b) While turning the belt tensioner counterclockwise, remove the pin.
NOTICE:
Make sure that the V belt is properly set to each pulley.
(c) After installing the belt, check that it fits properly in the
ribbed grooves.
HINT:
Make sure to check by hand that the belt has not slipped out
3. INSTALL V-BANK COVER SUB-ASSEMBLY
3UR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION; 2...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст