Toyota Tundra (2015 year). Manual — part 233
DTC CODE
DETECTION ITEM
SEE PAGE
C1272/72
Deceleration Sensor Output Voltage Malfunction (Test Mode DTC)
C1281/81
Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC)
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: ...
A
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000001K2602NX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: 43; ABS Control System Malfunction; 2015 MY
Tundra [08/2014 - ]
DTC
43
ABS Control System Malfunction
DESCRIPTION
This DTC is output when the VSC system detects a malfunction in the ABS control system.
DTC CODE
DTC DETECTION CONDITION
TROUBLE AREA
43
Malfunction in ABS control system
ABS control system
INSPECTION PROCEDURE
NOTICE:
When replacing the VSC actuator assembly, perform zero point calibration
.
PROCEDURE
1.
CHECK ABS CONTROL SYSTEM
(a) Clear the DTC
.
(b) Turn the ignition switch to ON.
(c) Check if the same DTC is recorded
.
Result
RESULT
PROCEED TO
DTC (ABS control system DTC) is not output
A
DTC (ABS control system DTC) is output
B
B
REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
(ABS CONTROL SYSTEM)
2.
CONFIRM DTC
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: 43...
(a) Clear the DTC
.
(b) Turn the ignition switch to ON.
(c) Check if the same DTC is recorded
.
Result
RESULT
PROCEED TO
DTC (43) is not output
A
DTC (43) is output
B
B
REPLACE VSC ACTUATOR ASSEMBLY
A
USE SIMULATION METHOD TO CHECK
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: 43...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000000WE203GX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C0200/31,C0205/32,C1271/71,C1272
/72,C1275/75,C1276/76,C1330/35,C1331/36; Right Front Wheel Speed Sensor Signal; 2015 MY Tundra
[08/2014 - ]
DTC
C0200/31 Right Front Wheel Speed Sensor Signal
DTC
C0205/32 Left Front Wheel Speed Sensor Signal
DTC
C1330/35 Open Circuit in Right Front Wheel Speed Sensor Circuit
DTC
C1331/36 Open Circuit in Left Front Wheel Speed Sensor Circuit
DESCRIPTION
The speed sensors detect the wheel speeds and send appropriate signals to the skid control ECU.
The speed sensors detect those magnetic changes and send pulse signals to the skid control ECU. The ECU
monitors the wheel speeds through these pulse signals to control the ABS control system.
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст