Toyota Tundra (2015 year). Manual — part 2112
(c) Check the stop light switch assembly clearance.
Stop light switch assembly clearance:
1.5 to 2.5 mm (0.0590 to 0.0984 in.)
(d) Connect the connector to the stop light switch assembly.
(e) Install the stop light switch cover.
LIGHTING: STOP LIGHT SWITCH: INSTALLATION; 2015 MY Tund...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM00000309100IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: COMPONENTS...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM00000309000JX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: ON-VEHICLE INSPECTION; 2015 MY Tundra [08/2014 -
]
ON-VEHICLE INSPECTION
1. INSPECT TURN SIGNAL FLASHER
(a) Disconnect the turn signal flasher connector.
(b) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
4 (E) - Body ground
Always
Below 1 Ω
(c) Connect the turn signal flasher connector.
(d) Measure the voltage according to the value(s) in the table
below.
Standard Voltage:
TESTER
CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
8 (LR) - 4 (E)
Hazard warning switch
off
Below 1 V
Hazard warning switch
on
Alternating between 11 to
14 V and below 1 V (60 to
120 times per minute)
2 (LL) - 4 (E)
Hazard warning switch
off
Below 1 V
Hazard warning switch
on
Alternating between 11 to
14 V and below 1 V (60 to
120 times per minute)
1 (B) - 4 (E)
Always
11 to 14 V
6 (EL) - 4 (E)
Ignition switch ON
Headlight dimmer
switch (turn left) off
9 V or higher
Ignition switch ON
Headlight dimmer
switch (turn left) on
Below 1 V
7 (ER) - 4 (E)
Ignition switch ON
Headlight dimmer
switch (turn right) off
9 V or higher
LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: ON-VEHICLE ...
TESTER
CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
Ignition switch ON
Headlight dimmer
switch (turn right) on
Below 1 V
12 (HAZ) - 4
(E)
Hazard warning switch
off
9 V or higher
Hazard warning switch
on
Below 1 V
If the result is not as specified, there may be a malfunction in the
turn signal flasher.
Text in Illustration
*a
LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: ON-VEHICLE ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст