Toyota Tundra (2015 year). Manual — part 410
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002BL4046X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE SPEED SENSOR NT
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.
(c) Remove the O-ring from the sensor.
2. REMOVE SPEED SENSOR SP2
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.
(c) Remove the O-ring from the sensor.
A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: REMOVA...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002BL2045X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT SPEED SENSOR NT
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
560 to 680 Ω
If the result is not as specified, replace the sensor.
2. INSPECT SPEED SENSOR SP2
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
1 - 2
20°C (68°F)
560 to 680 Ω
If the result is not as specified, replace the sensor.
A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSPEC...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002BL1046X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL SPEED SENSOR SP2
(a) Coat a new O-ring with ATF and install it to the sensor.
(b) Install the sensor with the bolt.
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
(c) Connect the sensor connector.
2. INSTALL SPEED SENSOR NT
(a) Coat a new O-ring with ATF and install it to the sensor.
(b) Install the sensor with the bolt.
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
(c) Connect the sensor connector.
A760E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALL...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM0000013F2058X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: A760E AUTOMATIC TRANSMISSION: TORQUE CONVERTER CLUTCH AND DRIVE PLATE: INSPECTION;
2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY
(a) Inspect the 1-way clutch.
09351-32020
Check that the stator rotates smoothly when turned
clockwise and locks when turned counterclockwise.
If the results are not as specified, clean the converter and
recheck the 1-way clutch. If the results still are not as
specified, replace the torque converter clutch assembly.
During the stall test or when the shift lever is in N,
metallic sounds are not emitted from the torque
converter clutch.
The 1-way clutch turns in one direction and locks in
the other direction.
If the results are not as specified, replace the torque
converter clutch assembly.
HINT:
The sample illustration shows approximately 0.25 liters (0.26 US
(1) If the ATF is discolored and/or has a foul odor, stir the ATF in the torque converter clutch thoroughly
and drain the ATF with the torque converter facing upward.
A760E AUTOMATIC TRANSMISSION: TORQUE CONVERTER C...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст