Toyota Tundra (2015 year). Manual — part 2347
NEXT
7.
CONFIRMATION TEST
NEXT
END
DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: HOW ...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000001WYH023X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: OPERATION CHECK; 2015 MY Tundra [08/2014 -
]
OPERATION CHECK
1. NOTICES WHEN CHECKING
(a) Wireless door LOCK / UNLOCK function:
This function operates only when the vehicle is in its initial condition (the following 3 conditions are met).
No key is inserted into the ignition key cylinder.
All the doors are closed.
HINT:
(b) The wireless transmitter operating range differs depending on the situation.
The operating range differs depending on the user, the way the transmitter is held and the
location.
In certain areas, the operating range will be reduced due to the vehicle body shape and the
noise. The transmitter's operating range may be reduced or the transmitter may not function.
When the battery weakens, the operating range is reduced and the transmitter may not function.
HINT:
If the transmitter has had prolonged exposure to direct sunlight, such as being left on the
instrument panel, the battery may weaken or other problems may occur.
2. CHECK WIRELESS DOOR LOCK CONTROL FUNCTIONS
HINT:
The switches described below transmit signals and are built into the door control transmitter.
The transmitter's operating range must be taken into account while checks are being made.
(a) Make sure the vehicle is in a condition in which the wireless control functions can be operated (see above).
(b) Check the basic functions:
Check that all the doors lock when the LOCK switch is pressed.
Check that the driver side door unlocks when the UNLOCK switch is pressed once.
Check that all the doors unlock when the UNLOCK switch is pressed twice within 3 seconds after
the driver side door is unlocked (2 step unlock function).
(c) Check the chattering prevention function:
When a switch is pressed, check that the corresponding operation occurs only once. When the switch is held
down, check that the corresponding operation occurs only once and does not repeatedly activate. Lastly,
when the switch is pressed at 1 second intervals, check that the corresponding operation activates once for
seconds, check that the doors are relocked automatically.
(e) Check the switch operation fail-safe function:
If the key is in the ignition key cylinder, check that the doors cannot be locked by the LOCK switch.
However, this does not apply when the system is in recognition code registration mode.
(f) Check the door ajar warning function:
If a door is open or not completely closed, check that the doors cannot be locked by the LOCK switch and
that the wireless door lock buzzer sounds for 10 seconds.
(g) Check the answer-back function:
locking.
driver side door unlocking.
When the UNLOCK switch is pressed again within 3 seconds, confirm the simultaneous occurrence
(h) Check the illuminated entry function:
When all the doors are locked, check that pressing the UNLOCK switch causes the ignition key
cylinder light, room light and map light (when the light switch is in the DOOR position), foot light
and door mirror foot light* to illuminate simultaneously with the unlock operation.
HINT:
*: except Extended Type
After the lights illuminate, if nothing is performed, check that the lights fade out in 15 seconds.
After the lights illuminate, if the key is inserted into the key cylinder and the ignition switch is
turned ACC or ON within 15 seconds, check that the lights fade out.
While the lights are illuminated, if the LOCK switch is pressed and the doors lock, check that the
lights fade out 15 seconds after the doors lock.
(i) Check the panic function:
Check that if the PANIC switch is held down for 1 second or more, the theft deterrent alarm function sounds
the vehicle horns and security horn, flashes the door mirror turn signal indicators, headlights, taillights and
hazard warning lights, and illuminates the map light and room light for 60 seconds. With the theft alarm
function active, check that pressing any switch on the transmitter causes the theft alarm function to stop.
DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: OPER...
Last Modified: 9-16-2014
6.6 M
Doc ID: RM000001WYL029X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: REGISTRATION; 2015 MY Tundra [08/2014 -
]
REGISTRATION
1. DESCRIPTION OF CODE REGISTRATION
HINT:
HINT:
(a) Turn the ignition switch ON.
(b) Enter the following menus: Body Electrical / Main Body / Wireless Registration.
(c) Press both the LOCK and UNLOCK switches at the same time for 1 to 1.5 seconds.
(d) Press either switch for more than 1 second within 3 seconds.
(e) Check the response to the registration completion.
DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: REGI...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст