Toyota Tundra (2015 year). Manual — part 732
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000013EZ06SX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION UNIT: DISASSEMBLY; 2015 MY Tundra
[08/2014 - ]
DISASSEMBLY
1. REMOVE TRANSMISSION CONTROL SHAFT LEVER RH
(a) Remove the nut, spring washer and control shaft lever.
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(c) Remove the park/neutral position switch.
HINT:
Make sure that the manual valve lever shaft has not been
rotated prior to installing the park/neutral position switch as the
detent spring may become detached from the manual valve
lever shaft.
3. REMOVE SPEED SENSOR
(a) Remove the 2 bolts and 2 speed sensors.
(b) Remove the 2 O-rings from sensors.
4. REMOVE TRANSMISSION OIL COOLER ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) w/ Trailer Towing System:
(1) Remove the 3 bolts and transmission oil cooler with transmission oil thermostat.
(2) Separate the transmission oil cooler from the transmission oil thermostat.
(3) Remove the 4 O-rings.
(b) w/o Trailer Towing System:
(1) Remove the 3 bolts and transmission oil cooler with
transmission oil cooler spacer.
(2) Separate the transmission oil cooler from the transmission oil
cooler spacer.
(3) Remove the 4 O-rings.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
5. REMOVE AUTOMATIC TRANSMISSION BREATHER TUBE
(a) Remove the 2 bolts.
(b) Remove the breather tube.
(c) Remove the O-ring from the tube.
6. REMOVE AUTOMATIC TRANSMISSION HOUSING
(a) Remove the 14 bolts.
(b) Remove the transmission housing.
7. REMOVE TRANSFER ADAPTER REAR
(a) Remove the 10 bolts.
(b) Remove the rear adaptor transfer.
HINT:
8. REMOVE TRANSMISSION CASE ADAPTER OIL SEAL
(a) Using a screwdriver, pry out the oil seal.
NOTICE:
Be careful not to damage the rear adaptor transfer. Wrap the tip
BEARING
(a) Using a screwdriver, remove the snap ring.
(b) Using SST and a press, press out the bearing.
SST: 09950-60010
09951-00650
SST: 09950-70010
09951-07150
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
10. FIX AUTOMATIC TRANSMISSION CASE SUB-ASSEMBLY
(a) Install the transmission case on the overhaul attachment.
11. REMOVE AUTOMATIC TRANSMISSION OIL PAN
SUB-ASSEMBLY
NOTICE:
Do not turn the transmission over as this will contaminate the
12. INSPECT AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
13. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
(a) Turn over the transmission.
(b) Remove the 4 bolts and oil strainer from the valve body.
(c) Remove the O-ring from the oil strainer.
14. REMOVE TRANSMISSION WIRE
(a) Remove the 2 bolts and 2 temperature sensor clamps.
(b) Disconnect the 2 ATF temperature sensors.
(c) Disconnect the 9 connectors from the solenoid valves.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст