Toyota Tundra (2015 year). Manual — part 2786
(a) Remove the 2 screws.
(b) Detach the 2 claws to remove the lower steering column cover.
9. REMOVE UPPER STEERING COLUMN COVER
(a) Detach the 4 clips.
(b) Detach the claw to remove the upper steering column cover.
10. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY
(a) Disconnect the 5 connectors from the turn signal switch with
spiral cable.
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
11. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)
12. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax)
13. REMOVE COWL SIDE TRIM BOARD LH
14. REMOVE INSTRUMENT SIDE PANEL LH
15. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
16. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
17. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
(a) Remove the bolt and air duct.
18. REMOVE STEERING INTERMEDIATE SHAFT ASSEMBLY
(a) Remove the 3 bolts and nut.
(b) Put matchmarks on the steering intermediate shaft and the
steering column.
Text in Illustration
*a
Matchmark
(c) Remove the bolt and steering intermediate shaft from the steering column.
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
(d) Put matchmarks on the No. 2 steering intermediate shaft and
steering intermediate shaft.
Text in Illustration
*a
Matchmark
(e) Remove the bolt and steering intermediate shaft from the No. 2 steering intermediate shaft.
19. REMOVE NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Put matchmarks on the No. 2 steering intermediate shaft and
power steering gear.
Text in Illustration
*a
Matchmark
(b) Remove the bolt and No. 2 steering intermediate shaft from the power steering gear.
20. REMOVE STEERING COLUMN ASSEMBLY
(a) Remove the bolt and 2 nuts. Then remove the steering column
from the instrument panel reinforcement.
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZQO01BX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering
Column): DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1. REMOVE TRANSPONDER KEY AMPLIFIER (w/ Engine
Immobiliser System)
(a) Using a screwdriver, widen the claws attached to the upper
bracket by approximately 1.0 mm (0.0394 in.).
(b) Pull out the transponder key amplifier with the claws open.
NOTICE:
Using excessive force may damage the case.
2. REMOVE KEY CYLINDER LIGHT ASSEMBLY (w/o Engine
Immobiliser System)
(a) Using a screwdriver, widen the claws attached to the upper
bracket by approximately 1.0 mm (0.0394 in.).
(b) Pull out the key cylinder light with the claws open.
NOTICE:
Using excessive force may damage the case.
3. REMOVE UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY
(a) Secure the steering column in a vise.
(d) Using a screw extractor, remove the 2 tapered-head bolts, and
then remove the upper steering column with switch bracket and
the steering lock bracket from the steering column.
4. REMOVE IGNITION SWITCH LOCK CYLINDER ASSEMBLY
(a) Turn the ignition switch lock cylinder to the ACC position.
STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manu...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст