Toyota Tundra (2015 year). Manual — part 1802
3UR-FBE STARTING: IGNITION SWITCH: COMPONENTS; 2015 ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002DYS01XX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE STARTING: IGNITION SWITCH: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from
the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery
terminal notice before proceeding with work
.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE STEERING COLUMN ASSEMBLY
(a) for Manual Tilt:
Remove the steering column assembly
.
(b) for Manual Tilt and Telescopic:
Remove the steering column assembly
.
(c) for Power Tilt and Power Telescopic:
Remove the steering column assembly
.
4. REMOVE UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual
Tilt)
5. REMOVE UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual
Tilt and Manual Telescopic Steering Column)
6. REMOVE UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Power
Tilt and Power Telescopic Steering Column)
7. REMOVE IGNITION SWITCH ASSEMBLY
3UR-FBE STARTING: IGNITION SWITCH: REMOVAL; 2015 MY Tu...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002DYQ01YX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE STARTING: IGNITION SWITCH: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT IGNITION SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER
CONNECTION
SWITCH
CONDITION
SPECIFIED
CONDITION
All terminals
LOCK
10 kΩ or higher
2 (ACC) - 4 (AM1)
ACC
Below 1 Ω
1 (IG1) - 4 (AM1)
ON
2 (ACC) - 4 (AM1)
5 (AM2) - 6 (IG2)
1 (IG1) - 4 (AM1)
START
3 (ST1) - 4 (AM1)
5 (AM2) - 6 (IG2)
5 (AM2) - 7 (ST2)
If the result is not as specified, replace the ignition switch
assembly.
3UR-FBE STARTING: IGNITION SWITCH: INSPECTION; 2015 MY...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002DYP01XX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 3UR-FBE STARTING: IGNITION SWITCH: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
2. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual
Tilt)
3. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual
Tilt and Manual Telescopic Steering Column)
4. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Power
Tilt and Power Telescopic Steering Column)
5. INSTALL STEERING COLUMN ASSEMBLY
(a) for Manual Tilt:
Install the steering column assembly
.
(b) for Manual Tilt and Telescopic:
Install the steering column assembly
.
(c) for Power Tilt and Power Telescopic:
Install the steering column assembly
.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3UR-FBE STARTING: IGNITION SWITCH: INSTALLATION; 2015 ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст