Toyota Tundra (2015 year). Manual — part 2501
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002XDQ00PX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. REMOVE FRONT SEAT ASSEMBLY RH
HINT:
Use the same procedure as for the driver seat
.
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
3. REMOVE FRONT SEAT CUSHION SHIELD RH
4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD RH
5. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY
6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
(a) Detach the 12 hooks and remove the separate type front seat cushion cover with pad.
7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Detach the 2 fasteners.
(b) Remove the 10 hog rings and separate type front seat cushion cover.
SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): REMOVAL...
Text in Illustration
*1
Fastener
8. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH
(a) Detach the 10 tack pins to remove the front seat cushion heater
assembly RH.
SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): REMOVAL...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000002XF803FX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
(1) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER
CONNECTION
CONDITION
SPECIFIED
CONDITION
3 - 5
Seat cushion heater
temperature 23°C (73°F)
2.89 to 3.53 Ω
If the result is not as specified, replace the front seat cushion
heater assembly RH.
Text in Illustration
*a
Component without wire harness connected
(Front Seat Cushion Heater Assembly RH)
SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): INSPECT...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002XDR00PX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): INSTALLATION; 2015 MY Tundra [08/2014 -
]
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY RH
(a) Set the front seat cushion heater assembly LH on the separate type front seat cushion cover.
(b) Using a tacker, install the front seat cushion heater assembly LH
to the separate type front seat cushion cover with 10 new tack
pins as shown in the illustration.
NOTICE:
Do not substitute other metal parts for tack pins.
2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Set the separate type front seat cushion cover in place.
(b) Using hog ring pliers, install the separate type front seat cushion
cover to the separate type front seat cushion pad with 10 new
hog rings as shown in the illustration.
NOTICE:
Be careful not to damage the separate type front seat cushion
cover.
Be sure to securely install the hog rings as shown in the
illustration while preventing wrinkles from forming on the
separate type front seat cushion cover.
HINT:
Install the hog rings at the cutouts if they are there.
(c) Attach the 2 fasteners.
Text in Illustration
*1
Fastener
*2
Hog Ring Pliers
*a
Cutout
3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
SEAT: FRONT SEAT CUSHION HEATER (for Manual Seat): INSTALL...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст