Toyota Tundra (2015 year). Manual — part 2290
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000017ZR07UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2. DRAIN ENGINE COOLANT
for 1UR-FE:
for 3UR-FE:
for 3UR-FBE:
3. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the
battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice
before proceeding with work
.
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the
SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
5. REMOVE NO. 2 COOLER COVER
(a) Remove the 2 nuts.
(b) Detach the 2 claws and remove the No. 2 cooler cover.
6. DISCONNECT SUCTION PIPE SUB-ASSEMBLY AND AIR CONDITIONER TUBE ASSEMBLY
AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL; 2015 ...
(a) Remove the bolt.
(b) Detach the plate as shown in the illustration.
Text in Illustration
*1
Plate
(c) Disconnect the suction pipe sub-assembly and air conditioner tube assembly.
NOTICE:
7. DISCONNECT INLET HEATER WATER HOSE AND
OUTLET HEATER WATER HOSE
hose.
8. REMOVE FRONT WIPER MOTOR AND BRACKET
9. REMOVE STEERING COLUMN ASSEMBLY
10. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
for Column Shift Type:
for Floor Shift Type:
11. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY
(a) Disconnect the clamps, connectors and wire harness.
AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL; 2015 ...
(b) Remove the 11 bolts and 4 nuts.
(c) Remove the instrument panel reinforcement assembly.
(1) for Driver Side:
Remove the 2 caps and 3 bolts.
AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL; 2015 ...
Text in Illustration
*1
'TORX' Bolt
*2
Collar
(2) for Passenger Side:
Using a T40 "TORX" socket, remove the 2 "TORX" bolts.
HINT:
When removing the bolts, the collars may come off with the bolts.
(3) for Passenger Side:
Using a 12 mm hexagon wrench, remove the 2 collars.
12. REMOVE REAR NO. 1 AIR DUCT (except Regular Cab)
(a) Detach the 7 claws and remove the rear No. 1 air duct.
AIR CONDITIONING: AIR CONDITIONING UNIT: REMOVAL; 2015 ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст