Toyota Tundra (2015 year). Manual — part 2834
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002W0J009X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION; 2015 MY Tundra [08/2014
- ]
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a) Attach the 2 claws to install the tire pressure warning reset switch.
(b) Connect the switch connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
3. INSTALL INSTRUMENT SIDE PANEL LH
4. INSTALL COWL SIDE TRIM BOARD LH
5. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, for CrewMax)
6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)
TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:...
Last Modified: 9-16-2014
6.6 L
Doc ID: RM000000XMK0BFX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: PRECAUTION; 2015 MY Tundra [08/2014 - ]
PRECAUTION
1. TIRE PRESSURE WARNING SYSTEM PRECAUTION
(a) When the tire pressure warning light turns on, immediately
check the tire pressures and adjust them to the specified
value(s).
Text in Illustration
*1
Tire Pressure Warning Light
Cold tire inflation pressure:
TIRE SIZE
FRONT PRESSURE
REAR PRESSURE
P255/70R18
210 kPa (2.1 kgf/cm
2
, 30
psi)
230 kPa (2.3 kgf/cm
2
, 33
psi)
P275/65R18
210 kPa (2.1 kgf/cm
2
, 30
psi)
230 kPa (2.3 kgf/cm
2
, 33
psi)
P275/55R20
210 kPa (2.1 kgf/cm
2
, 30
psi)
230 kPa (2.3 kgf/cm
2
, 33
psi)
(b) When the tire pressure warning light turns on after blinking for 1 minute, there is a malfunction in the
system. Check for DTCs.
(c) It is necessary to register the transmitter ID in the tire pressure warning ECU after replacing the tire
pressure warning valve and transmitter and/or tire pressure warning ECU
.
(d) When replacing the tire pressure warning ECU:
(2) Register the transmitter IDs after installing a new tire pressure warning ECU.
(e) When replacing the tire pressure warning valve and transmitter:
after replacing the tire pressure warning valve and transmitter and installing the tires and wheels on
the vehicle.
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: PREC...
NOTICE:
The transmitter ID is written on the tire pressure warning valve and transmitter. It will be unable to be
is necessary to perform initialization
after the registration
.
(g) Precautions about the tire pressure:
The tire pressures decrease naturally.
In winter, tire pressure may decrease due to low ambient temperatures (tire pressure decreases
by approximately 10 kPa (0.1 kgf/cm
2
, 1.5 psi) for every 10°C (50°F) drop in the ambient
temperature). Therefore, the tire pressure warning is more likely to operate if the tire pressures
are not adjusted appropriately. If the daily temperature variation is large, pressurize the tires
high so that the tire pressures are suitable under cold conditions. As a result, incorrect tire
pressure warning operation should decrease.
2. IN CASE OF TIRE AND WHEEL REPLACEMENT
(a) Depending on the tire type, the system may not function properly even if the specified wheels are used.
(b) When tires and wheels are replaced, always ensure that each transmitter ID is correctly registered.
3. INITIALIZATION PRECAUTION
When rotating the tires on vehicles whose front and rear tire inflation pressure standard values
are different.
HINT:
The tire pressure warning system will not operate properly if it is not initialized
.
4. FAIL-SAFE FUNCTION
(a) When a system malfunction occurs in the tire pressure warning system, the tire pressure warning light
5. CHECK TIRE PRESSURE AFTER REPAIRS
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: PREC...
(a) After repairs, confirm that the actual tire pressures are displayed in the Data List
.
TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: PREC...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст