Toyota Tundra (2015 year). Manual — part 2485
ILLUSTRATION
SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): COMPONENTS; ...
ILLUSTRATION
SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): COMPONENTS; ...
SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): COMPONENTS; ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002XDP00MX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the
battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice
before proceeding with work
.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the battery negative (-) terminal to disable the
SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE FRONT SEAT HEADREST ASSEMBLY
(a) Remove the front seat headrest assembly.
4. REMOVE INNER SEAT TRACK BRACKET COVER LH
(a) Operate the seat track adjusting handle to move the seat to the foremost position.
(b) Detach the clip to remove the inner seat track bracket cover LH
in the direction indicated by the arrow shown in the illustration.
5. REMOVE OUTER SEAT TRACK BRACKET COVER LH
SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): REMOVAL; 2015...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст