Toyota Tundra (2015 year). Manual — part 2172
Last Modified: 9-16-2014
6.6 U
Doc ID: RM000000X8Z0CMX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function):
FAIL-SAFE CHART; 2015 MY Tundra [08/2014 - ]
FAIL-SAFE CHART
1. POWER WINDOW OPERATION IN FAIL-SAFE MODE
HINT:
If the pulse sensor built into the power window regulator motor malfunctions, the power window control
system enters fail-safe mode.
(a) The power window control system prohibits the following power window operation when the pulse sensor
for the jam protection function has problems and the window position or the learned value is abnormal.
Power Window Control System
POWER WINDOW
OPERATION
IGNITION
SWITCH ON
KEY-OFF
(WITHIN APPROXIMATELY 45
SECONDS AFTER IGNITION
SWITCH TURNED OFF)
KEY-OFF
(AFTER APPROXIMATELY 45
SECONDS ELAPSED AFTER IGNITION
SWITCH TURNED OFF)
Manual UP
Operation
prohibited
Operation prohibited
Operation prohibited
Manual DOWN
Operative
(Jam protection
not operative)
Operation prohibited
Operation prohibited
AUTO UP
(hold switch at
AUTO UP position)
Operative
(in MANUAL
mode)
(Jam protection
not operative)
Operation prohibited
Operation prohibited
AUTO UP
Operation
prohibited
Operation prohibited
Operation prohibited
AUTO DOWN
Operation
prohibited
Operation prohibited
Operation prohibited
HINT:
When the pulse sensor is normal, the AUTO UP/DOWN function can be resumed by deactivating fail-safe
mode. To deactivate fail-safe mode, pull up the power window switch to the AUTO UP position and hold it
for at least 1 second to fully close the window from the fully open position.
(b) If the LIN communication line malfunctions (communication stop), the power window control system
prohibits the following operations.
Master Switch
POWER WINDOW OPERATION
IGNITION SWITCH ON
MANUAL UP
Operative (Jam protection operative)
MANUAL DOWN
Operative (Jam protection not operative)
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
POWER WINDOW OPERATION
IGNITION SWITCH ON
AUTO UP (hold switch at AUTO UP position)
-
AUTO UP
-
AUTO DOWN
-
HINT:
Remote up/down function does not operate.
Power Window Regulator Switch (for Front Passenger Side)
POWER WINDOW OPERATION
IGNITION SWITCH ON
MANUAL UP
Operative (Jam protection operative)
MANUAL DOWN
Operative (Jam protection not operative)
AUTO UP (hold switch at AUTO UP position)
Operative (Jam protection operative)
AUTO UP
Operative (Jam protection operative)
AUTO DOWN
Operative (Jam protection not operative)
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
Last Modified: 9-16-2014
6.6 U
Doc ID: RM0000027QL04DX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function):
DATA LIST / ACTIVE TEST; 2015 MY Tundra [08/2014 - ]
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely
on these reference values when deciding whether a part is faulty or not.
(a) Warm up the engine.
(b) Turn the ignition switch off.
(c) Connect the Techstream to the DLC3.
(d) Turn the ignition switch to ON.
(e) Turn the Techstream on.
(f) Enter the following menus: Body Electrical / (desired system) / Data List.
(g) According to the display on the Techstream, read the Data List.
Master Switch
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
D Door P/W
Auto SW
Driver side power window auto UP/DOWN
switch signal / ON or OFF
OFF: Driver side switch of
master switch not operated
-
P Door P/W
Auto SW
Front passenger side power window remote
auto UP/DOWN switch signal / ON or OFF
ON: Front passenger side switch
-
P Door P/W Up
SW
Front passenger side power window remote
manual UP switch signal / ON or OFF
ON: Front passenger side switch
-
P Door P/W
Down SW
Front passenger side power window remote
manual DOWN switch signal / ON or OFF
ON: Front passenger side switch
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
operated
Window Lock
Switch Status
Power window LOCK switch / ON or OFF
ON: Power window lock switch
in LOCK position
OFF: Power window lock switch
in UNLOCK position
-
Number of
Trouble Codes
-
D-Door Motor
TESTER DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
D Door P/W Auto
SW
Driver side power window auto UP/DOWN
switch signal / ON or OFF
ON: Driver side switch
operated
OFF: Driver side switch
not operated
-
D Door P/W Up
SW
Driver side power window MANUAL UP switch
signal / ON or OFF
ON: Driver side switch
operated
OFF: Driver side switch
not operated
-
D Door P/W Down
SW
Driver side power window MANUAL DOWN
switch signal / ON or OFF
ON: Driver side switch
operated
OFF: Driver side switch
not operated
-
Number of
Trouble Codes
displayed
-
P-Door Motor
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC
NOTE
P Door P/W
Auto SW
Front passenger side power window auto
UP/DOWN switch signal / ON or OFF
ON: Power window regulator
switch assembly operated
OFF: Power window regulator
switch assembly not operated
-
P Door P/W Up
SW
Front passenger side power window
manual UP switch signal / ON or OFF
ON: Power window regulator
switch assembly operated
OFF: Power window regulator
switch assembly not operated
-
P Door P/W
Down SW
Front passenger side power window
manual DOWN switch signal / ON or OFF
ON: Power window regulator
switch assembly operated
OFF: Power window regulator
switch assembly not operated
-
WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст