Toyota Tundra (2015 year). Manual — part 2779
OK
OK
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
J47-6 (VCI) - J48-4 (VCI)
Always
Below 1 Ω
J47-7 (TIS) - J48-5 (TIS)
Always
Below 1 Ω
J47-17 (E1) - J48-6 (E1)
Always
Below 1 Ω
J47-6 (VCI) - Body ground
Always
10 kΩ or higher
J47-7 (TIS) - Body ground
Always
10 kΩ or higher
J47-17 (E1) - Body ground
Always
10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
5.
CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - BODY
GROUND)
(a) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
J47-11 (GND) - Body ground
Always
Below 1 Ω
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
6.
CHECK MULTIPLEX TILT AND TELESCOPIC ECU (VCI, TIS TERMINAL VOLTAGE)
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC ...
OK
(a) Reconnect the J47 multiplex tilt and telescopic ECU connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
TESTER CONNECTION
SWITCH CONDITION
SPECIFIED CONDITION
J48-4 (VCI) - J48-6 (E1)
Ignition switch ON
8 to 16 V
J48-5 (TIS) - J48-6 (E1)
Ignition switch ON
8 to 16 V
NG
REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
7.
CHECK TILT POSITION SENSOR
(a) Reconnect the J48 tilt motor connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC ...
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
J47-7 (TIS) - J47-17 (E1)
Steering tilts up or tilts down
Pulse generation
High: 8 to 16 V
Low: Below 1 V
NG
REPLACE STEERING COLUMN ASSEMBLY
OK
REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC ...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000000XZA06JX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: B2611;
Telescopic Position Sensor or Telescopic Motor Circuit Malfunction; 2015 MY Tundra [08/2014 - ]
DTC
B2611
Telescopic Position Sensor or Telescopic Motor Circuit Malfunction
DESCRIPTION
The telescopic motor is operated by the power source voltage supplied from the multiplex tilt and telescopic ECU
and slides the steering column forward and backward. The telescopic position sensor (Hall IC) in the telescopic
HINT:
CODE
DETECTION CONDITION
TROUBLE AREA
B2611
Telescopic operation stops within the operation range
while operating.
Harness or connector
Telescopic position sensor or
telescopic motor
Multiplex tilt and telescopic ECU
WIRING DIAGRAM
STEERING COLUMN: POWER TILT AND POWER TELESCOPIC ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст