Toyota Tundra (2015 year). Manual — part 2978
NO.
ITEM
APPLICATION
(6)
Connector Lock Mechanism (2)
Connectors 2, 4
(7)
Improper Connection Prevention Lock
Mechanism
Connectors 1, 3
(b) All connectors in the SRS, except the seat position airbag sensor connector, are colored yellow to
distinguish them from other connectors. These connectors have special functions, and are specially designed
for the SRS. All SRS connectors use durable gold-plated terminals, and are placed in the locations shown
below to ensure high reliability.
(1) Terminal twin-lock mechanism:
retainer and the lance) to prevent terminals from coming out.
(2) Activation prevention mechanism:
All connectors with an activation prevention mechanism contain a short spring plate. When these
connectors are disconnected, the short spring plate creates a short circuit by automatically connecting
(3) Half connection prevention mechanism:
If the connector is not completely connected, the connector is disconnected due to the spring force so
that no continuity exists.
(4) Connector position assurance mechanism:
Only when the housing lock (white part) is completely engaged, the CPA (yellow part) slides, which
completes the connector engagement.
(5) Connector lock mechanism (1):
Locking the connector lock button connects the connector securely.
(6) Connector lock mechanism (2):
Both the primary lock with holder lances and the secondary lock with retainer prevent the connectors
from becoming disconnected.
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PREC...
(7) Improper connection prevention lock mechanism:
When connecting the holder, the lever is pushed into the lock position by rotating around the A axis to
lock the holder securely.
4. DISCONNECTION OF CONNECTORS FOR STEERING PAD, FRONT PASSENGER AIRBAG
(SQUIB SIDE), KNEE AIRBAG, CURTAIN SHIELD AIRBAG, FRONT SEAT SIDE AIRBAG AND
FRONT SEAT OUTER BELT
HINT:
Tape the screwdriver tip before use.
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PREC...
5. CONNECTION OF CONNECTORS FOR STEERING PAD, FRONT PASSENGER AIRBAG
(SQUIB SIDE), KNEE AIRBAG, CURTAIN SHIELD AIRBAG, FRONT SEAT SIDE AIRBAG AND
FRONT SEAT OUTER BELT
(a) Connect the connector.
6. DISCONNECTION OF CONNECTOR FOR SPIRAL CABLE (INSTRUMENT PANEL WIRE
SIDE) AND FRONT PASSENGER AIRBAG (INSTRUMENT PANEL WIRE SIDE)
(a) Place a finger on the slider, slide the slider to release the lock, and then disconnect the connector.
SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PREC...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст